Help Files

#1 Video clips. A list of the short video clips that accompany the 23 parts
http://www.buildeazy.com/10x10-tudor-shed-videos.html

#2 Water level. How to make a simple bucket and hose water level to check the ground and floor levels.
http://www.buildeazy.com/fp_waterlevel.html

#3 Rebating and notching. A couple of references on how to rebate the floor joists and the wall-frame plates. Although the descriptions are for a smaller shed, the method is the same. So use the ideas but not the measurements.
http://www.buildeazy.com/workshop/tudor-shed-3.html
http://www.buildeazy.com/workshop/tudor-shed-4.html

#4 Getting and working with angles. Because of the sloping side-walls and the pitch of the roof, there will be a few varying angles to cope with. This page will help.
http://www.buildeazy.com/workshop/tudor-shed-helpfile-1.html

#5 Cutting a curve. Ideally, use a band saw to cut the curves, however, there is another alternative using a circular saw as explained at
http://www.buildeazy.com/workshop/tudor-shed-5.html

#6 Making the door. A detailed explanation on how to make a door similar to the door in this project, albeit smaller. Take the idea but not the dimensions. Use the dimensions given in this project.
http://www.buildeazy.com/workshop/tudor-shed-15.html

#7 Making the window. A detailed explanation on how to make a window similar to the window in this project, albeit smaller. Take the idea but not the dimensions. Use the dimensions given in this project.
http://www.buildeazy.com/workshop/tudor-shed-16.html

#8 Understanding the measurements.
http://www.buildeazy.com/workshop/tudor-shed-19.html#section-19-2