color break
pinterest icon facebook icon instagram icon twitter icon google plus icon youtube icon

How to build a Bench Swing Support Frame

Materials list

You will need....
All the lumber listed below is 100x100 (4x4) stock and should be suitable for exterior use.

4 pieces at 2400 (8ft) long. Cut the legs from this.
1 piece at 2700 (9ft) long. For the beam.
1 piece at 3000 (10ft) long. Cut the braces from this.

Note: You can purchase this plan in downloadable PDF file, print-friendly and in clean copy (free of ads) for only $5.00.   Click here to purchase.
The plans can be purchased online and immediately downloaded to your computer.

To view all available $5 downloadable plans click here.

You will also need....

Galvanized nail-on plate. 2 at 100x100 (4x4); 10 at 125x50 (2x5); 2 at 150x50 (2x6).
All of the above can be cut out of bigger size plates if necessary.
Four 12mm (1/2") galvanized bolts 220mm (8 3/4") long.
Two 10mm (3/8") galvanized bolts 150mm (6") long. To hang the bench swing chain off.
140 50mm (2") flathead galvanized nails.
A handful of 100mm (4") galvanized nails.

Home   About   Contact   Help   Site rules   What's here   Projects   Your work   $5 plans   Free plans   Shop   Subscribe
Copyright all rights reserved