These are plans for the nesting boxes and storage area.

The front and internal partitions in the nesting boxes/storage area combination are of 300x25 stock. The sides, the bottom, the nesting boxes' lid and storage area door are 18mm plywood. (The storage area door is not shown in this plan).

There is a gap or cavity between the internal partitions separating the nesting boxes from the storage area. This allows for two separate exterior lids: one above the nesting boxes and one above the storage area. Make the lids larger than the area they are to cover, so they overhang at the sides and at the bottom. They can then be hinged to the 100x25 piece of wood that runs along the top of the unit.

NOTE: This complete plan-set can be immediately purchased in downloadable PDF format free of advertising and print friendly for only $5. click here for more info

Go to...
Page 1: Introduction - Materials list Page 2: Plan - Looking down view Page 3: Plan - Front elevation Page 4: Plan - Side elevation	Page 5: Plan - The nest Page 6: Instructions step 1 - 3 Page 7: Instructions step 4 - 6 Page 8: Instructions step 7 - 8