Note: this is the standard (ft and inch) version. For the metric version click here
Step 6. Fitting the dormer front wall
First mark the size and shape of the dormer front wall onto a spare piece of MDF board.
Do this by holding a piece of 1/2" MDF board up against the front of the dormer and marking (with a pencil) the dormer opening (from inside the dormer) onto the piece of MDF board.
Then cut the triangular dormer front wall and mark, drill, and cut out the windows.
The procedure for cutting out the windows is the same for every window in the dollhouse, i.e. marking the center of the window, drilling through the center with a 1" drill bit, and then making the window square with a jigsaw.
The pictures below show the order of making the windows and fitting the dormer front wall.
Picture 1: Mark where the windows are to go and find the centers.
Picture 2: Center punch the middle of the windows (a starting guide for the drill bit).
Picture 3: Drill the holes and then make square with a jigsaw.
Picture 4: Apply some glue and fit the dormer front wall into the opening.