1: Introduction, overview
2: Wood sizes, Angles, Material list
3: Plans: Side elevation, Legs, Spoke pieces
4: Plans: Spoke cutting detail
5: Plans: Table and seat board cutting detail
6: Cut the spokes to length
7: Shape the ends of the spokes
8: Assemble the spokes
9: Cut the tabletop and seat boards
10: Fix some seat boards
11: Fix the rest of the seat boards
12: Fix the tabletop boards
13: Align the upper and lower frames
14: Cut and fix the legs to the spokes
15: Drop in the umbrella
16: User Photo/Comments
● See the video at YouTube
Step 10: Align the lower frame
Lift up the lower frame (in upside-down mode) and place it carefully on top of the spacer blocks.
All the spokes of the lower frame should be directly above the spokes of the upper frame.
Don't forget, the whole thing is upside down at this stage. That is why the upper frame is lower, and the lower frame is upper.
Ensure that the lower frame overhangs the spacer blocks evenly all the way around.
Now you are ready to fix the legs in place.