For the seat sides, legs, back slats, upper back support, and the seat slats you will need...
38ft (11.5m) of 3/4" x 5 1/2" (140mm x 20mm) wood, allowing for a little bit of wastage.

For the front and rear spacers, lower back support, and arm braces you will need...
8ft (2.4m) of 3/4" x 3 1/2" (90mm x 20mm) wood, allowing for a little bit of wastage.

For the arms you will need...
64" (1600mm) of 1 1/2" x 5 1/2" (140mm x 45mm) wood.

Note: When cutting, cut the longer pieces first to minimize wastage.

You will also need...
- Around 90 exterior-type 1 1/2" (38mm) long screws.
- Four 3/8" x 2" (10mm x 50mm) galvanized carriage bolts and washers.
- Exterior-type glue

ID	ITEM	STOCK SIZE	LENGTH	No.
[a]	seat sides	3/4" x 5 1/2" (140mm x 20mm)	39" (975mm)	2
[b]	rear spacer	3/4" x 3 1/2" (90mm x 20mm)	23 1/4" (580mm)	1
[c]	legs	3/4" x 5 1/2" (140mm x 20mm)	22 3/4" (570mm)	2
[d]	lower back support	3/4" x 3 1/2" (90mm x 20mm)	24 3/4" (620mm)	1
[e]	back slats	3/4" x 5 1/2" (140mm x 20mm)	38" (950mm)	4
[f]	arm braces	3/4" x 3 1/2" (90mm x 20mm)	7" (175mm)	2
[g]	seat slats	3/4" x 1 3/8" (35mm x 20mm) Rip (cut lengthways) from 3/4" x 5 1/2" (140mm x 20mm) stock	24 3/4" (620mm)	16
[h]	arms	1 1/2" x 5 1/2" (140mm x 45mm)	32" (800mm)	2
[i]	upper back support	3/4" x 5 1/2" (140mm x 20mm)	30 3/4" (770mm)	1
[j]	front spacer	3/4" x 3 1/2" (90mm x 20mm)	24 3/4" (620mm)	1