How to make a boot bench page 3

How to make a Boot Bench

How to make a boot bench

Page one: Introduction - Plans - Cutting list - Parts description
Page two: Making the boot box frame
Page three: Making the boot box
Page four: Making the back-rest
Page five: The arm-rest - User Comments/Photos

boot-benchseat, installing the front and back boot box panels

Step 7:

Lay the frame on its side and fix one of the plywood panels [e] to the rails [c] as shown in the picture.

Flip the unit over and repeat with the other panel on the other side.

boot-benchseat, preparing the side boot box panels

Step 8:

Measure cut and fit the two side plywood panels [g].

Step 9:

Screw the lid support [h] to the top rear rail [c] but first, position the lid support [h] so that it is 18mm (3/4") above the top of the top rear rail [c] which is the thickness of the lid [i].

Pre-drill all the screw holes in the lid support [h].

Step 10:

Cut and position the lid [i].

Ensure that the lid has at least 6mm (1/4") clearance on each side so that it can open and shut without grinding against anything.

NOTE: This complete plan-set can be purchased in downloadable PDF format with more pictures free of advertising and print friendly for only $5. For more info click here

Step 11:

Fix three evenly spaced hinges to the lid [i] and the lid support [h].

<<< Previous page Next page >>>


CONTACT US \| POLICIES \| ABOUT US \| SUBSCRIBE \| FEEDBACK \| SITE RULES \| LINKS HELP \| ADVERTISE \| FREE PLANS \| BUY PLANS \| EAZY PROJECTS \| FAQ \| EAZY FIND Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material in this website is strictly prohibited without expressed written permission from the owner.