How to make a picnic table page 4

Free plans - Large size
traditional style Picnic Table

see video

Traditional picnic table project

Related topics: Picnic Tables

Page one: Introduction - Materials

Page four: Making the end frames

Page five: Fixing the table and seats

Step 3: Place the legs

Place the picnic table legs in the template as shown in the picture and also in the template plan

The legs should fit neatly into place provided they were cut according to the cutting list plan

Step 4: Place the support pieces

Lay the seat and table support pieces in place on top of the legs.

Refer to the template plan for placement measurements.

Step 5: Nail the end frame

Nail the table and seat support pieces to the legs.

The nails are to hold the frame together to enable drilling and bolting once the frame is removed from the template.

Pre-drill the nail holes in the support pieces to avoid splitting.

Use two 90mm (3 1/2") flat-head galvanized nails at each meeting.

Refer to the template plan for nail placement.

Step 6: Remove the end frame

Lift the end frame out of the template and place on a couple of work stools in preparation for drilling and bolting.

Step 7: Drill and bolt

Drill and bolt the seat and table support pieces to the legs.

Use two bolts at each meeting.

<<< Previous page Next page >>>


CONTACT US \| POLICIES \| ABOUT US \| SUBSCRIBE \| FEEDBACK \| SITE RULES \| LINKS HELP \| ADVERTISE \| FREE PLANS \| BUY PLANS \| EAZY PROJECTS \| FAQ \| EAZY FIND Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material in this website is strictly prohibited without expressed written permission from the owner.