K2 telephone box

(28 customer reviews)
SKU: downloadable-026 Category:

$5.00

This is a downloadable PDF file How to build a K2 English Telephone Box.

There are 68 pages in the downloadable file, including plans, drawings, photos, and step-by-step instructions.

This is a very good copy of the K2 phone box, which a listed iconic structure.

The K2 telephone kiosk is arguably the most iconic British telephone box of all time.

K2 stands for Kiosk 2, and was the second booth to be deployed around London. That was in 1926.

I measured up a K2 booth in London, took loads of photos, made one, and wrote about it.

It is such an awesome structure to have in your property.

My version stands 8′ 7″ (2575mm) high and is 37″ (925mm) square.

It has great detail and even the inside ceiling and light is a great copy.

The plans are written in both standard (inch) and metric (millimetre) measurements.

I constructed the head out of wood, hypertufa (very lightweight concrete), and fiberglass. I had never worked with the latter two before but found using both to be fun and easy.

The rest of the project was pretty much basic woodworking with a little bit of forethought.

Help is in the form of user-input and the URL for the user/comments page is given in the documentation in the downloadable file.

28 reviews for K2 telephone box

5.0 out of 5
27
1
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Avatar

    DAVE

    Hi,
    thought I’d send you a picture of my attempt at your plans for the K2 Telephone Box.
    I’m not quite finished – still got the ceiling, light fitting etc.
    Regards, Dave McKay

    Helpful(2) Unhelpful(0)You have already voted this
  2. Avatar

    Doug

    G’day Les
    Its great to have friends working at the right places. Saved me many hours of work.
    Really enjoying the challenge of building the phone box.
    The cost of cedar in NZ is really expensive
    Kind regards
    Doug Taylor

    Helpful(0) Unhelpful(0)You have already voted this
  3. Avatar

    DEREK

    Thanks for your plans which are great. I am making good progress. Roof next! Cheers
    Derek Forbes

    Helpful(1) Unhelpful(0)You have already voted this
  4. Tom

    Tom

    l have built a k2 phone box following buildeazy plans. With a few minor changes to the way of doing things. I am very pleased with the results , and everyone who sees it ,or sees my pics are really impressed. Thank you so much for your inspiration !
    The only real problem is , that it has not stopped raining since I finished and I am getting leaks which I believe are somewhere on the neck.
    I recycled materials as far as possible ,to save money.
    These are the changes I made to either save money or make easier.
    I cast the roof in a mix of sharp sand , polystyrene balls ( beanbag fill ) and cement.
    I made the brass lamp holder out of an old wall light.
    The door handle was bought from Wilkinsons for less than £2 and I added a stainless plate to the back of it.
    I tried to route out the crowns but kept messing up. So I finished up making stencils to paint them on.
    I printed the signs and sandwiched them between glass.
    I enclose pics for your approval.
    Tom Wright

    Helpful(1) Unhelpful(0)You have already voted this
  5. Avatar

    Handyman

    I ordered your plans for the Red English K2 Telephone Box.
    After reviewing them I decided to go off on my own and downsize the project for the purpose of making a novelty lamp.
    I encorporated some elements of your design and some from the various models of the K series boxes.
    Enclosed is a picture of the final product.
    It stands just under 5′ tall, 21″ wide and 18″ deep.

    Helpful(1) Unhelpful(0)You have already voted this
  6. Avatar

    ANDY

    Hi. Here is a couple of photos of the k2 telephone box I made from you plans.
    The only change I made was to use mesh and fibreglass only for the dome and to put a concrete slab within the base to give it some stability outside.
    This just made it easier for me to complete it on my own.
    It is the very first project I have tried with wood and your plans were easy to follow (although with no joinery knowledge it took quite a long time to complete) and I have now bought the tardis plans for my next project.
    Thanks
    Andy from Carlisle in Cumbria, UK

    Helpful(1) Unhelpful(0)You have already voted this
  7. Avatar

    TIM

    Hello Les,
    Thanks for all the inspiring stuff on your website – too many projects for the future!
    I’m a brit who’s been in Melbourne a couple of years and has now married an Aussie. To add a touch of Britishness to a very Aussie, country wedding… my friend Mark – a fellow Pom – and I took on the challenge of the K2 Phone Box, with the intention of making it a photo booth at the wedding.
    Plenty of challenges on the way, often as a result of only being able to purchase wood in standard aussie metric dimensions, and then adjust everything accordingly. Others caused by our complete lack of wood-working experience.
    We made a few minor adjustments:
    – Reduced the amount of curved decoration on the head, due to lack of skill and patience on our part!
    – Slightly reduced decoration of top corners of frames, again due to lack of time.
    – Added a door latch, carpet on the floor, corner brace brackets to the base/frames, included a handle inside and out.
    – Added full height internal supports on the inside of each corner to better hold the head up. This was just because we were incredibly nervous about the very heavy head being held by such little contact, and we were going to be opening our doors to drunk people so wanted to avoid the possibility of disaster!
    – There were other things we had to do because we had to build it in such a way that it was easily packed down, transported and re-constructed, and would continue to be after the wedding.
    (We also went for a plain ceiling due to lack of time, and patience.)
    Anyway, we thought you’d like to see the end result. It went down very well on the day, and helped stop me being completely upstaged by my wife making her own (amazing) wedding dress.
    https://www.facebook.com/media/set/?set=a.10153532545255099.1073741827.822940098&type=1&l=234e883bae
    Best,
    Tim Pyke

    Helpful(0) Unhelpful(1)You have already voted this
  8. Avatar

    PETE

    More k2 photos as promised from
    Pete steers. Kereru road. Hastings. Hawkes bay. New Zealand.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Avatar

    LEONARDO

    It’s incredible, is so beauty! With patient y will do it, thanks for all, without this pages I can’t think to do it, thank you again. Leo.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Avatar

    Dave

    Excellent! A fabulous project, well executed and very well explained here. I particularly liked the use of hypertufa in the roof construction. The attention to details is inspirational. I’ve really enjoyed reading how you made this. Thanks!

    Helpful(0) Unhelpful(0)You have already voted this
  11. Avatar

    Yvonne

    New Zealand. Hawkes bay. May 2013 and finally finished the K4 phone box. Sprayed all surfaces and obtained a 1950s Bakelite phone, working, and had a phone box party. Came out well in the end.
    Yvonne Steers

    Helpful(0) Unhelpful(0)You have already voted this
  12. Avatar

    John

    Thank you for your inspiration
    John R

    Helpful(0) Unhelpful(0)You have already voted this
  13. Avatar

    John

    I have completed my phone box project. Well not really, I am enhancing the interior with some 40’s- 50’s period signs, an AB box, and a phone.
    I truly enjoyed this project, it pushed my skills at times and that was a good thing as I learned a lot.
    I have attached some photo’s for you to look at. Thanks Again
    John R

    Helpful(1) Unhelpful(0)You have already voted this
  14. Avatar

    Albert

    Nice! I want one.
    Albert, Kentucky

    Helpful(0) Unhelpful(0)You have already voted this
  15. Avatar

    Billie

    I would like to give you much praise. Y did a beautiful job and created a masterpiece.
    I am building one also. Mine is more like the k6 and will be only 7 feet tall. It will be inside my home and will serve as a elevator car traveling only one story.
    I cannot find a paint dealer that can provide the color BS 539. Any ideas of where to get it? Again– Congrats on a great example of a Telephone kiosk.
    Billie Sims

    Helpful(0) Unhelpful(0)You have already voted this
  16. Avatar

    KELLY

    Congratulations! A beautiful job.
    I’d like you to create plans for a T.A.R.D.I.S. lol

    Helpful(0) Unhelpful(0)You have already voted this
  17. Avatar

    Pete

    What a great challenge. Just got started. One section at a time makes the wallet and wife happier. Based in New Zealand wood is SO!dear to buy. Got my dome complete and the neck. Onto the frame now while the dome finishes drying. I wonder what the average amount of hours these take to build?
    Reply from Les
    It does take a long time to make and it will keep your wallet empty, but it will be well worth it. Everyone who has seen the one I made has commented on it and wanted one for themselves, more so than any other project I have done.
    Pete Steers

    Helpful(0) Unhelpful(0)You have already voted this
  18. Avatar

    JOHN

    I am sending recent pic’s of my phone box project.
    I needed to make some adjustments due to the fact that mine will be indoors and I must do the building in my workshop and assembly in the room where my bar is.
    All is going fairly well no major issues. The head is as you planned except I made the dome from 1/8 bendable plywood and am working the seams with Bondo.
    I have made the frame, back panel and floor piece but will do the painting in the shop.
    I do not have a “death wish” for paint spillage on the carpet.
    John

    Helpful(0) Unhelpful(0)You have already voted this
  19. Avatar

    Bill

    Gosh that looks good. I’ve seen old phone boxes for sale and they cost hundreds and wouldn’t pay that. I quite fancy one but not sure whereabouts in the garden I’d put it, or what I’d put in it.
    I’ve just found your site by accident so will bookmark it and follow your build with interest.
    Bill (Liverpool UK)

    Helpful(0) Unhelpful(0)You have already voted this
  20. Avatar

    John

    I can’t wait to see the next post. Thinking ahead to the sides and door. Looks like to foam is the way to go. My booth will be indoors near my English bar .
    John R

    Helpful(0) Unhelpful(0)You have already voted this
  21. Avatar

    Tony

    I started building a K6 model about six years ago but never finished it. I agree with you, I like the k2 model better. You have rekindled my desire to build another and this time maybe finish it. I will follow your progress with interest, and when you have the final plans online, I will more than likely have another go.
    Tony, Buffalo NY (ex England)

    Helpful(0) Unhelpful(0)You have already voted this
  22. Avatar

    KOTOUC

    Hi.
    This is my RED TELEPHONE BOX. Material = cca (approximately) 100Ł. Working hours = cca (approximately) 30. Head and neck is from polystyrene, body is from thin wood.

    Helpful(1) Unhelpful(0)You have already voted this
  23. Avatar

    SANDRA

    When we returned from a year living in England a few years ago, my husband decided we should have a phone booth in our garden in Australia. I searched and searched for plans online, but to no avail. We are finally landscaping out there, and I’m so amazed and pleased you have done all the hard work already! I’m eagerly awaiting the plans!!Thanks!
    Sandra, Australia

    Helpful(0) Unhelpful(0)You have already voted this
  24. Avatar

    COSMIN

    I’m proud to present you a phone box made in Romania after your great plans maybe you want to use the images on your website.
    thank you very much.
    Cosmin Radulescu, Romania

    Helpful(1) Unhelpful(0)You have already voted this
  25. Avatar

    John

    I have read and re-read your wonderful plans for the English Phone Booth, Les, and thanked you a thousand times for handing me the dimensions and build ideas.
    The attached pictures of my Little Free Library shows it’s approx half scale. I took liberties, many indecent, with your plans, but the Phone Booth DNA is unmistakable.
    It was built out of epoxied White Oak, and nary a fastener used until the base. You’re the guy I thank for helping me do it.
    BTW – I build outdoors, year long, under a deck, with a table saw I can carry in one hand. It is amazing what you can do with a table saw slide table. I very much appreciated your simple approach to building!
    http://westseattleblog.com/2014/10/west-seattles-newest-little-free-library-is-fit-for-a-doctor/
    Thanks,
    John T. Monahan

    Helpful(0) Unhelpful(0)You have already voted this
  26. Avatar

    Andrea

    My name is Andrea. I like to build things out of wood and I found your website with great projects.
    One that stroke me best was the K2 kiosk, that was about a year ago and since I couldn’t stop thinking of when I’ll start doing it. Well, now I’m almost done and looking forward to finish it.
    While doing the K2 I was recording all of the steps showing how I made the pieces.
    Since I live in Mexico (in a small town) it’s hard to come by things to build, such as exact color BS 539, hardware, epoxy, fiberglass, etc.
    So I used many different approaches and techniques to build parts, as they say ”make do”.
    Andrea Arzensek

    Helpful(0) Unhelpful(0)You have already voted this
  27. Avatar

    Doug

    Hi Les and viewers
    My phonebox is now taking up pride of place in our back yard..
    Rather than build a timber base I have used small plastic 12 mm high blocks to keep the box above the concrete pad and away from water
    These are currently used in the house building industry)
    The box is strapped to the concrete base (300kgs) using galvanised L brackets
    I also made up the exterior corner shakels by bending aluminium to provide added strength.
    I did take some artistic licence by routing the exterior muntin bars with a decorative bevel and also tiling the floor.
    The tiles form a sill that prevents water from migrating under the sides of the box
    On my visit to the UK last year I bought a coin box as I couldn’t locate one anywhere in NZ (Half my baggage allowance)
    I copied the internal shelving from pictures
    I didn’t router the crowns but used transfers instead. (Done to lessen any water ingression plus the top of mine was fibreglass over solid polystyrene)
    To save on the cost of an electrician I have used a 12v system with a 60w bulb
    I changed the old phone from pulse to tone using a “Dialgizmo” and it works fine.
    I am very pleased with my result and have just downloaded the plans for the Police Box
    Thanks for the excellent plans Les. I have enjoyed every minute of the challenge
    Regards
    Doug Pukekohe

    Helpful(0) Unhelpful(0)You have already voted this
  28. Avatar

    TIM

    Hello Les,
    Thanks for all the inspiring stuff on your website – too many projects for the future!
    I’m a brit who’s been in Melbourne a couple of years and has now married an Aussie. To add a touch of Britishness to a very Aussie, country wedding… my friend Mark – a fellow Pom – and I took on the challenge of the K2 Phone Box, with the intention of making it a photo booth at the wedding.
    Plenty of challenges on the way, often as a result of only being able to purchase wood in standard aussie metric dimensions, and then adjust everything accordingly. Others caused by our complete lack of wood-working experience.
    We made a few minor adjustments:
    – Reduced the amount of curved decoration on the head, due to lack of skill and patience on our part!
    – Slightly reduced decoration of top corners of frames, again due to lack of time.
    – Added a door latch, carpet on the floor, corner brace brackets to the base/frames, included a handle inside and out.
    – Added full height internal supports on the inside of each corner to better hold the head up. This was just because we were incredibly nervous about the very heavy head being held by such little contact, and we were going to be opening our doors to drunk people so wanted to avoid the possibility of disaster!
    – There were other things we had to do because we had to build it in such a way that it was easily packed down, transported and re-constructed, and would continue to be after the wedding.
    (We also went for a plain ceiling due to lack of time, and patience.)
    Anyway, we thought you’d like to see the end result. It went down very well on the day, and helped stop me being completely upstaged by my wife making her own (amazing) wedding dress.

    Helpful(1) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    5 images maximum / 31.25MB per image / jpeg, pjpeg, png, gif

    BuildEazy
    Logo
    Enable registration in settings - general
    Shopping cart