compact folding picnic table By Les Kenny
1: Introduction, the structure of the thing
2: About the measurements, wood sizes
3: The materials (shopping) list
4: The materials (shopping) list continued
5: The cutting list
6: Cut, shape, and drill the pieces
7: Plans, the individual frame pieces
8: Make up the smaller side frames
9: Fix the seat support pieces to the long legs
10: Assemble the side frames
PAGE CONTENTS CONTINUED
11: Prepare the frames for seat and tabletop
12: Make the seat and tabletop panels
13: Fix and seats and tabletop
14: Adjust the backstops and fix the bracing
15: Plans - the armrest
16: Make and fit the armrest frames
17: Make and fit the armrest pads
18: Make the umbrella hole and more photos
19: User Comments/Photos
● See the video at YouTube
Step 4. Fix the seat support pieces to the long legs
Fix the seat support pieces [g] and [h] to the long legs [f]. Two units in all, one for each side of the folding picnic table.
Use glue and two 50 mm (2") wood screws at each join and pre-drill the screw holes through the top member.
Refer to the plan below for positioning.
Make up each pair of frames so that they are mirror images of each other. Refer to the photos below the plan.