Woodworking plans for a seesaw (teeter-totter) with sliding seats.
There are 16 pages in the downloadable file, consisting of plans, drawings, photos, and step-by-step instructions.
A heavy kid can have a balanced ride with a lighter kid.
This seesaw (teeter-totter) consists of a fulcrum and lever. The lever is a 4×4 beam. The seats surround the beam and can be slid up or down the beam and locked in place.
In other words, by adjusting the seats, a heavy kid can have a balanced ride with a light kid.
Good idea eh?
The lumber stock sizes required to make the seesaw (teeter-totter) are 2×6 (150mm x 50mm), 2×4 (100mm x 50mm), and 4×4 (10mm x 100mm)
The overall length is 11ft (3350mm)
The plans are written in both standard (inch) and metric (millimetre) measurements.