Table of Contents
Step 5. Joining the side frames and beams
Lean the brachiation ladder and one side frame against each other.
Positioned the brachiation ladder correctly in the side frame and clamp it in place.
See fig.1.
Ensure the ladder is a neat fit between the side frame and also the same distance down from the top, on both sides.
You can then drill through the existing holes in the plywood brace into and through the side frame
legs [c].
Thread bolts through the holes, add washers and nuts, tighten them up, and there’s one side done.
Temporary prop the other end up.
See fig.2.
Positioned the other side fame correctly over the brachiation ladder and clamp it in place.
See fig.3.
Ensure the ladder is a neat fit between the side frame and also the same distance down from the top, on both sides.
You can then drill through the existing holes in the plywood brace into and through the side frame
legs [c].
Thread bolts through the holes, add washers and nuts, tighten them up, and that’s the other side done.
Leave a Reply