How to make a Pergola – Box Type

Pergola Box Result

This pergola is called the ‘box’ pergola because it is built with rows of solid blockings/nogs between the rafters forming rows of square or oblong boxes. This type of pergola is becoming increasingly popular and is relatively easy to build.

Material

MATERIALAMOUNT
150×50 (2×6) treated lumber   rafters, blockings/nogs and decorative ends30 metres (100 ft)
200×50 (2×8) treated lumber   beam3.6 metres (12 ft)
100×100 (4×4) treated lumber7.2 metres (24 ft)
1kg (2.5 lb) gal 90mm (3 1/2″) nails; 20 galvanized nail plates; 8 12mmx120mm (1/2″x 5″) galvanized coach/carriage bolts, 2 bags concrete mix 

About the lumber

All the lumber used in this project is treated dressed/surfaced pine. The posts are treated for in ground applications. and the rest of the structure is treated for outside use. All the lumber that is used in this project is readily available at most lumber merchants.

The lumber sizes referred to in this project are the nominal sizes. The nominal size of a piece of lumber is the size of the lumber before it is dressed or seasoned and is the size generally referred to when purchasing from the lumber yard. The actual size, or dressed size of the lumber will be less than the nominal size so please make necessary allowances. For example, a piece of 100×50 (2×4) lumber when dressed may be 90×45 (1 1/2″x 3 1/2″) actual size.

The Plans.

The plan view (birds eye view looking down), the front view plan and the side view plan.

The Posts, beams and rafters.

  • The bottoms of the posts are bolted to the deck joists or the deck boundary joist and also concreted into the ground. The ledger plate (also called stringer) is bolted to the house wall above the door, The top of the posts are checked out to accommodate the beam and the rafters are nailed in place between the ledger and the beam.
  • A square hole (post size) is cut in the decking. The posts are placed through the hole in the decking and into a hole dug in the ground. The bottoms of the posts are bolted to the deck joists or the deck boundary joist and also concreted into the ground. (See drawing below).
Pergola  - Box Type : Post - Lower

The roof structure

  • The ledger plate (also called stringer) is bolted to the house wall above the door with 12mm (1/2″) galvanized screws every 900mm (36″) apart. There is (in most cases) a lintel (beam) above all doors, thus ensuring solid fixing. The height of the ledger plate determines the overall roof structure height.
  • The required heights of the top of the posts are obtained by levelling across from the top of the ledger plate .
  • The top of the posts are rebated/checked out to accommodate the pergola beam. Refer to image below.
Pergola  - Box Type : Post Top
  • The beam is bolted in place. See the plans for dimensions
  • The rafters are nailed in place between the ledger and the beam. See the plans for dimensions
Pergola  - Box Type : Rafters

The Nogs and Decorative Rafter Ends.

The nogs:

  • The rows of solid nogs or blockings are placed and nailed between the rafters. See the plans for dimensions

The decorative ends:

Pergola  - Box Type : The decorative ends
  • The decorative ends are a continuation of the rafters and the rows of solid nogs/blockings. They are secured in place with 2 90mm (3 1/2″) galvanized nails skewed, toe nailed through the lower part of the decorative ends and with nail plates fixed on the top edge. (see drawing)
Pergola  - Box Type : The decorative ends
  • The rows of solid blocking/nogs are placed and nailed between the rafters and the decorative ends are fixed in place.

Securing the top together.

  • The pergola roof structure is locked together by fixing galvanized nail plates on the top edges of the rafters, blockings/nogs and decorative ends.
Pergola  - Box Type : Nail Plates

The Finish.

Pergola  - Box Type : The finish

All done. Eazy with a Z !

Les Kenny

Buildeazy.com started as a hobby for Les Kenny over eight years ago when he decided he would share his successful DIY projects with the wider world, putting them up online for anyone to access.

1 Comment
  1. A well thought out plan, using simpler methods of construction. The goals of great strength and cost make this attractive.

Leave a reply

5 images maximum / 31.25MB per image / jpeg, pjpeg, png, gif

BuildEazy
Logo
Enable registration in settings - general
Shopping cart