Hexagonal picnic table

(20 customer reviews)
SKU: downloadable-014m Category:

$5.00

  • Pay online by credit card, debit card, or Paypal using Secure Server Paypal. You do not need a Paypal account if paying by credit or debit card.
  • After making payment you will automatically be sent an email with a secure download link.

Hexagonal table plans & instructions – $5.00 USD

Purchasing Instructions – easy as

Simply click on the ‘BUY IT NOW’ button above and fill in the required fields displayed in the pages that follow to complete the payment transaction.

After payment, you will automatically be re-directed to a ‘thank you’ page.
You will also be sent an email with the download link along with a receipt, to the email address you used to purchase the plan.

No email? Please check your spam folder. The email with the download link will be obvious with the following headings; FROM: Buildeazy, SUBJECT: Your order is ready.

Specification: Hexagonal picnic table

Page

14

20 reviews for Hexagonal picnic table

4.9 out of 5
17
3
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Avatar

    ROBERT

    Great plan for a picnic table.
    I used treated deck boards for the top. The last board needed to be ripped and rounded over with a router, but it kind of adds a trip effect to the finished project.
    Also securing the spokes of the table to a piece of plywood prior to installing the seats or tops helps to ensure they will stay in place during construction.
    The distance between spokes is equal to the radius of the table. My kids love the large table.
    The extra blocking on the lower spoke and blocking under the table allowed drilling a hole for and umbrella.
    Robert Boone

    Helpful(0) Unhelpful(0)You have already voted this
  2. Avatar

    KENT

    Love my table…of course there were some modifications.

    First the size had to be reduced to fit comfortably on our deck. Away with the bench seats and the outer 2×6 ring was changed to 2×4.

    As a first time miter saw user I had some difficulty with the upper frame bevel cuts. ( I don’t believe the Imperial dimensions for the long face (1 3/4″) are correct for dressed lumber.) So I cut six 15″ gussets/spreaders and installed them between the upper frame arms to assure 60 degree angles before assembling the frame and nailing the upper metal straps.

    The spreaders also served as a “backstop” for the 2×6 legs which were installed inside the spreaders.

    This eliminated the lower frame and also kept the feet inside the table perimeter for safety (tripping that is… you’d appreciate that if you knew the condition my guests sometimes manage to achieve.)

    The 7″ inner triangles ended up with a truncated tip also due to the dressed size of the lumber. So, if I had to have a plug it may as well be substantial. Three rings of 2×2 (1 1/4 x 1 1/4 dressed) were added and a scrap piece of 2×6 was cut for the hexagonal center. This I think added an interesting architectural relief to the table.

    Lastly, because these inner pieces float, and my grandchildren love puzzles, I carefully numbered them on the bottom.

    Thank You, Kent
    North Carolina

    Helpful(0) Unhelpful(0)You have already voted this
  3. Avatar

    Ingrid

    This plan makes a beautiful table!
    I’m a math teacher and I used your plan for a summer project for some of my 8th grade students who were willing to come up to school for 3 weeks to learn and work.

    This table will go in next to our school’s garden beneath a tree.

    There were plenty of lessons on fraction and decimal conversions, angle measurements, equilateral triangle and trapezoid characteristics, and we even used the Pythagorean Theorem to figure out if we could fit the completed table out of our school’s courtyard doors once complete.

    Three things I would do differently if I were to build another one:

    1) It seems like the seats are too low to the ground by an inch or so.
    2) I would use crates or car jacks to set the seat frame- this was, by far, the most difficult part.
    3) The stain we chose seems to be too dark for pine.

    Three things we modified from the plan:

    1) If you build according to the plan then you will have half inch gaps in between the trapezoids on the table top because the wood you actually buy isn’t 6 inches wide- it’s more like 5.5 inches…so we re-calculated and drafted a table top with no gaps and brought the seats in closer a bit
    2) we used 1×6 lumber instead of 2×6 for the table top surface to make the table lighter.
    3) We added chunks of 2×4 for seat support at the end of the lower frame pieces.
    4) We took the recommendation of someone else on this site and cut our frame pieces in 60 and 120 degree angles.

    Total cost in material = $170
    Total time to build (with students and teaching them etc.) = 35 hours

    Many thanks!
    Ingrid Ristroph
    Martin Middle School in Austin, Texas

    Helpful(0) Unhelpful(0)You have already voted this
  4. Avatar

    Mark

    Thanks for the plans. My wife is very pleased with the result.

    Regards,

    Mark Edwards, Worthing, England

    Helpful(0) Unhelpful(0)You have already voted this
  5. Avatar

    BEN

    This table was very easy to build. I originally made all my cuts with a circular saw but I got worried that my angles weren’t true so I went back and made all the cuts with a miter saw. You have to flip the board over to cut the last tiny bit on your 2×6’s but it made for a very clean cut. This was a Christmas gift for my mother and she loved it. Thanks for such a great free site.
    Ben Davidson

    Helpful(0) Unhelpful(0)You have already voted this
  6. Avatar

    Corey

    That was a great plan!!! Everything was exact except for my chop saw. It slipped a little during my cuts for the table top, but everything turned out fine. Thanks a lot for this site of free plans. I live in Canada and it cost $150 to build. A lumber store in the area had a much smaller one for $149. This one gives you lots of leg room. Thanks Again.
    Corey and Lynne

    Helpful(0) Unhelpful(0)You have already voted this
  7. Avatar

    Snowcat

    The hexagon picnic table is a great project… easily seats a large number of adults. Ours takes a lot of abuse.

    Recommendations would be to double up the seat supports by sistering a second 2x and using 2×6’s for the legs instead of 2×4. We priced #1 cedar and composite and found the cedar to be very affordable – total price with hardware was $250 US. Snowcat

    Helpful(0) Unhelpful(0)You have already voted this
  8. Paul

    Paul

    It is a great bbq table to sit at. We easily fit 6 adults and 3 children around it. Was unable to source the 150 x 40 at my timber yard (had to order specially and more expensive)so used 150 x 50 which made the table heavier (It is not one to move too often). Also used 100 mm flatheads as they didn’t have 90 mm either. I think the h4 and h3 are around the wrong way in the description. A drop saw is quite useful for this project to get the angles right. Still with one I spent about 5-6 hours cutting and measuring (may be I’m slow). Putting together it helps to have 2 people as the seat and table sections are heavy. Found that car jacks were useful for getting the seat section at the right height. Could cost more than $300 for the materials. Paul

    Helpful(0) Unhelpful(0)You have already voted this
  9. Avatar

    BRIAN

    You probably won’t see more modifications made to a set of your freebie plans than this project.

    I’ve always liked this table design but what suited my requirements was just the table (minus the benches) and provision for an umbrella. The former wasn’t all that difficult to figure out… switch the frames over and lose the seating “gap” allowance from the dimensions. Finishing with a centered space for an umbrella in both frames was a bit more tricky but achieved by reinforcing stringers bridging the gap left when breaking the two long 2×4 frame members.

    The metal strapping had to go but was replaced by screws, glue, bolts and quite a few pocket hole joints. A bonus provided by the use of these extra stringers was being saved the 90″ cuts and only having 120″ ones throughout.

    All in all a fun project that combined a good set of plans with some interesting brain work as well. I’ve already received many compliments for a patio table with a unique design…
    Brian Hughes

    Helpful(0) Unhelpful(0)You have already voted this
  10. Avatar

    Kelly

    This is my third Buildeazy project. I am so happy I found this site. I was an absolute beginner in woodworking. Our farm allows me to build quite large projects. My first was a chicken coop. My sister purchased the ad-free plans for me and we are more than happy to help support such a great site.
    Recently I finished a hex picnic table for my sister (Nana) and my two great-nephews! It will have many uses as you can see.
    Again I purchased the downloadable ad-free, easy to follow plans.
    I made the frame out of SPF and the seats and top out of cedar. I’m so pleased with the table but, man, is it heavy!! I had to assemble it in place.
    Kelly

    Helpful(0) Unhelpful(0)You have already voted this
  11. Avatar

    Bill

    Here’s another hexagonal table made of knotty cedar – the third I have built as a donation for the Otto Specht School in Chestnut Ridge, NY.
    This one took me two days with very little scrap wood left over.
    The plans show lengths of each piece, but don’t calculate the actual amount of number you will need.
    This might be helpful when you go to buy the wood if you want to minimze waste – and cost:

    2×4 – 3 @ 10′, 3 @ 8′; 2×6 – 5 @ 10′, 5 @ 8′, 7 @ 6′.

    Instead of the plywood the plans call for under the seats, I used the 9.5″ temporary braces used when attaching the legs.
    It saves on wood, and is pretty invisible if you cut the ends facing outside at a 30 degree angle.
    I believe the cedar braces will last longer than plywood.
    Instead of nails, I used 2.5″ construction screws and filled the holes with plastic wood.
    The screws are quicker, stronger, and cleaner than nails.
    I used teak oil after sanding to 220 grade with an orbital sander (80 – 150 – 220).
    The tables I made last summer still look like new!

    Now that I have the routine down, I know I can build the next one in a day, including pickup of lumber, screws, straps, and carriage bolts (I use 3/8″ diameter and 2.5″ length).

    Helpful(0) Unhelpful(0)You have already voted this
  12. Avatar

    Ryan

    I wanted to send a couple of pictures of our hexagonal picnic table we built using your on-line plans, along with some verbiage you can post, if you wish. Thanks for making them available!
    ===================
    Thanks for making the plans available. Here are a couple of pictures of the table at various stages. Hopefully, they will be helpful for someone else who decides to build it. Overall, it probably took us 4 – 5 hours to cut everything and put it together.
    Total cost for all materials at the time we built it was about $200. I ended up using 3″ Deck-Mate screws for everything instead of nails and also put a piece of angled 2×4 under the middle of each seat instead of a piece of plywood.
    Ryan Parmenter

    Helpful(0) Unhelpful(0)You have already voted this
  13. Avatar

    ROD

    Thanks for these plans… Made this (amended) version using re-cycled timber for the tabletop. Three tables in one?
    – Basic garden table
    – Table with removable inserts in place
    – Existing umbrella accommodated by removing one section.
    Rod Stebbing

    Helpful(0) Unhelpful(0)You have already voted this
  14. Avatar

    ED

    Here is my take on the hexagonal picnic table. I had 3 solid weekends in the shop to build this one.
    Ed Deford

    Helpful(0) Unhelpful(0)You have already voted this
  15. Avatar

    Mike

    Attached you will find two photos of the 4 hexagon picnic tables we built for my son’s Eagle project. It took me about a week to cut and stain the wood and then one day (with a lot of help) to put them together.
    Mike G

    Helpful(0) Unhelpful(0)You have already voted this
  16. Avatar

    Handyman

    Enclosed is a photo of my table using your plans with a few modifications. Thanks for the help to build a lifetime of enjoyment.

    Helpful(0) Unhelpful(0)You have already voted this
  17. Avatar

    Adam

    It took me a whole year to make my hexagon picnic table. I needed the proper tools, time,and the weather here has been rain,rain,and rain.
    I covered it up for the winter then restarted working back on it beginning of spring.
    I messed up a couple of times on several different spots. This project wasn’t as easy as it looks to make. I followed the instructions i saw on your website. Everything worked out just fine.
    I sanded off all the boards,hosed off the whole table with an air hose to rid of the dust, and finally I used water proofer with honey gold stain mixed in for the finishing touch.
    I think it looks alright. My neighbor still doesn’t believe I made this all by myself,but I did.
    ty for the instructions guys! Of course adding an umbrella makes it look even more slick.
    Northern Ohio,

    Helpful(0) Unhelpful(0)You have already voted this
  18. Avatar

    Charles

    I built this table back in July for my wife’s birthday, she was extremely happy as this is a plan she picked out for me to build for her.
    I worked on this project off and on for three days, I have a large stack of treated lumber but only had 2×8’s so i ripped each and every board to the 2×4’s needed for the spokes and the 2×6’s needed for the seat and top boards. I chose to use 2×6’s for the legs because of the weight factor and to maximize the life span of the table.
    I built this with the old plan and did have trouble understanding the directions for the angles on the spokes, but after some trial and error and a few misscut boards i figured it out. I did decide to use an 18″ circle of 3/4 plywood underneath the bottom spokes with glue and screws for strength and i also added 2×6 runners cut on the same 30 degrees underneath the center of the seats for better support. if you look at the picture you can see the circle underneath as well as the additional runners underneath the center of the seats.. the entire table was put together with 3″ wood screws and is solid as a rock, it is also extremely heavy and I am sure it will be in our backyard for many years to come..
    Charles Medlin Rockwood, Tennessee

    Helpful(0) Unhelpful(0)You have already voted this
  19. Avatar

    Bill

    Here is a picture of the tables I referenced in my comments on your web site.
    Bill Kelly

    Helpful(0) Unhelpful(0)You have already voted this
  20. DAN

    DAN

    Hi there.
    Attached find pic of my hexagonal picnic table, made per your instructions. Could not be happier. Rock Solid, comfortable.
    I don’t remember if it said this in the instructions, but if it doesn’t, you should remind all the dum-dums (e.g., ME) to buy GALVANIZED nails/screws. Genius McGee over here bought the indoor kind and, sure enough, they are rusting already. Hopefully, when I sand and stain/seal it, it will help keep the rusting to a minimum.
    One other thing I would recommend is changing the length of the carriage bolts suggested. 4-1/2 inch long bolts leaves a lot of excess threading, which people could snag their thighs on getting up.
    I will definitely be coming to your site in the future.
    Great design, love the table! Thanks guys!
    Dan Wiley

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published.

    5 images maximum / 31.25MB per image / jpeg, pjpeg, png, gif

    BuildEazy
    Logo
    Enable registration in settings - general
    Shopping cart