color break
pinterest icon facebook icon instagram icon twitter icon google plus icon youtube icon

2 piece convertible picnic table

Your project photos

From Clive Baxter
I have just finished building the 2 piece... more below

To see the free plans for this project click here.
For the $5 downloadable version, free of ads click here.

2 in 1 seat and picnic table made by Clive - photo 2

2 in 1 seat and picnic table made by Clive - photo 1

From Clive Baxter
I have just finished building the 2 piece convertible picnic table and I am very happy with the results. I did deviate from the plan a little, omitting the side arms and replacing with blocks screwed to part "e" that settle on base end "d". This is because all cuts were done with a hand saw and the angles for the side arms were too difficult. I also omitted using nails and glued and screwed everything.
In addition, I used another 1600 plank with a hole cut in it to take an umbrella, and placed it between the two halves of the table top, unsecured. As can be seen from the two photos supplied it does not detract from the strength and stability of the unit, as demonstrated by me standing on it.
Thank you for an amazing project that will certainly outlast me!   Regards.

To see the free plans for this project click here.
For the $5 downloadable version, free of ads click here.

We appreciate your photos and comments.
All submissions can be sent via the BuildEazy Contact page at https://www.buildeazy.com/contact_us.html

Home   About   Contact   Help   Site rules   What's here   Projects   Your work   $5 plans   Free plans   Shop   Subscribe
Copyright buildeazy.com all rights reserved