Compact folding picnic table
Your project photos
From Reed
For the frame I used 5/4 x 6 pressure treated wood... more below
To see the free plans for this project click here.
For the $5 downloadable version, free of ads click here.
From Reed
For the frame I used 5/4 x 6 pressure treated wood (actual 1.25 x 5.5). I don't have a power miter saw so I cut each length with a circular saw then ripped into two identical pieces with a table saw. Cut the angles for each piece with a table saw. The top and seats are T&G pine. This may not hold up outside so I didn't glue them. I can always replace them with the same pressure treated wood. If I do this I will edge dowel them together rather than use a rod or a batten as shown in the plans.
Thanks for the plans. Here are some pictures:
To see the free plans for this project click here.
For the $5 downloadable version, free of ads click here.
We appreciate your photos and comments.
All submissions can be sent via the BuildEazy Contact page at www.buildeazy.com/contact_us.html
Return to the 'compact folding picnic table project' User Comments/Photos