How to build an Hexagonal Picnic Table
Your project photos
From Ryan Parmenter. - I wanted to send a couple of pictures of our hexagonal ... more below
From Ryan Parmenter
I wanted to send a couple of pictures of our hexagonal picnic table we built using your on-line plans, along with some verbiage you can post, if you wish. Thanks for making them available!
Thanks for making the plans available. Here are a couple of pictures of the table at various stages. Hopefully, they will be helpful for someone else who decides to build it. Overall, it probably took us 4 - 5 hours to cut everything and put it together.
Total cost for all materials at the time we built it was about $200. I ended up using 3" Deck-Mate screws for everything instead of nails and also put a piece of angled 2x4 under the middle of each seat instead of a piece of plywood.
We appreciate your photos and comments.
All submissions can be sent via the BuildEazy Contact page at https://www.buildeazy.com/contact_us.html
Return to the 'Hexagonal Picnic Table project' User Comments/Photos