10 Best Router Table – [Reviews & Guide 2022]

Router work along edges of fine woodworking projects improves their look and durability. Handheld routers can accomplish the job, but a router table will allow you to finish the job consistently and quickly. A router table will provide you with a secure hold on the router and allow you to use both hands to hold onto the wood that is being worked on. 

Included below are the ten best router tables that might fit your needs and a Buyer’s Guide and FAQ section to help you determine what to look for as you are making your choice.

  1. Best Heavy Duty Table: Kreg PRS1045 Router Table
  2. Best for Beginners: Bosch RA1181 Router Table
  3. Best with Dust Collection: Bosch RA1171 Router Table
  4. Simple Stability: Kreg PRS2100 Router Table
  5. Best with Stand: Skil RAS900 Router Table
  6. Best with Lift: JESSEM Mast-R-Lift Excel II
  7. Best without Router: Grizzly G0528 Router Table
  8. Best with Height Adjustment: Kreg PRS1040 Router Table
  9. Best with Router Combo: Craftsman Router and Router Table Combo
  10. Best for Home Use: Goplus Aluminum Router Table

🔎 Router Table Buyer’s Guide

A router table is one of the primary tools needed as a woodworker. It is a hand tool or power tool that helps users and experts route materials like wood or plastic. Most routers are fastened with their cutting edge in the router table, while other routers can also be handheld.

It is a form of a table in which a handheld router can be fixed, and the router’s cutter is being passed through a small hole to the table’s surface. When purchasing a router table, keep it in mind to get one that can make you use hands-free to direct and cut the wood you are working on without making any errors. In other words, a router table eliminates errors and improves accuracy. It also ensures the safety of your project at hand. A router table allows users to perform more advanced cutting, form edging profiles, install groves, etc.

Types of Router Tables

Router tables come in types and categories. There are various subsets of products, but router tables fall mainly into three types. These are:

  • Standard Routers – They are standard stationary router tables.
  • Compact Router – They are the most common type, and they are easy to use. They are mainly smaller, lighter than the, and easier to move from one place to another. They are sometimes even foldable. It is perfect for users with smaller workstations.
  • Full Router Table Systems – these are the best router tables. They are free-stand tables, typically larger tables used mainly as standalone tables. The functions of this table are more advanced, requiring that it is operated by a professional or someone that knows what is doing on the job. They are much more pricey, and they come with more useful features and accessories that can take your professional career to the next level.

Why you should Purchase a Routing Table

Having a routing table has many benefits for a woodworker, but we will borrow it down to the most prominent ones in this section. Below are some of the benefits that come with using a routing table for your projects.

  • When woodworkers use a routing table, it provides them with so much stability while routing plastic or wood. This beats when you manually use a routing tool with just your hands. A routing table is also proven to be very important and practical when you are trying to intensely shape a wood. By making your working surface much more stable, professionals and even enthusiastic can hasten up on their job delivery.
  • When users make use of a quality router table, they can actually focus their two hands more on the process of routing. When you don’t have any routing table, you are required to hold the router with one hand to increase accuracy. But with a routing table, your router can be held in a suitable and stable position so that you can concentrate more on the object you are routing.
  • Router tables make it easy for enthusiastic users to shape as well as cut wood. You have more precision and heightened operation.
  • The last reason why users and professionals should consider getting a routing table is that these products offer better safety. When you use a routing table, chances are slim that you would encounter errors like when you use a router without a routing table. If you are a professional, the routing table will greatly increase your accuracy, precision, and time management.

Before you can shop for a router table with confidence, you will want to familiarize yourself with the features that can influence the quality of this power tool.

➡️ Router Table Surface

The table surface might be one of the most important aspects to consider when shopping for a router table. The surface needs to be entirely smooth to prevent scratches along the wood surface. A smooth surface will also allow you to push the wood along the fence and bit without snagging.

Gaps between the fence and the table should not affect the stability of the wood piece on the table. Gaps between the table surface and the plate that the router is mounted onto should be small, and the surfaces need to be flush.

The table surface needs to be large enough to support the sizes of wood that you usually work with. It should also be made from solid materials and help to dampen vibrations generated when the router is on.

➡️ The Table Base

While some table designs are meant to be fixed onto a workbench, many products will include a base that the table will sit upon. The structure should be robust enough to handle the weight of the table, router, and projects that you will be working on.

The connectors for the legs and shelves should lock properly to not work loose during use. Finally, the legs should be placed in a way that secures the router table while providing stability.

➡️ The Fence

The router table fence needs to provide support in a straight line after the locks are secured to prevent variations in the cuts. The fence needs to have a large enough hole to accommodate the bit and room for wood debris to move.

The dials or levers used to lock the fence should be easy to use and should provide a solid lock to prevent movement when the project is pushed on it during the router session.

➡️ Dust Port

Most models will include some opening for the wood chips and dust to move through. With an open table, a dust port should be mounted in a way that can attach to the vac tubs while collecting a large portion of the dust. With a closed table, the chamber that the debris is pushed into should be easy to clear out with the vac system pressure. This area needs to be easily accessible so that you can also clear it out by hand.

➡️ Miter Gauge and Track

With router tables that include a miter gauge, you should test it to verify that it performs as intended. If the miter does not move easily through the track or will not offer proper angles as you move the wood across the bit, you may want to consider replacing it.

The track on the table needs to be recessed to not stand above the tabletop. It should provide a smooth movement for the miter and should be easy to access and clean.

➡️ Mounting Plate

The router connects to a plate that should offer a secure hold no matter the RPMs. There needs to be plenty of clearance between the bit and the plate opening to prevent the head or shaft of the bit from rubbing against the plate.

All connections to the table must be secure and also need to be flush to keep this surface even with the rest of the table. All mounting plates should be located near the center of the table and not along the edges of the table.

➡️ Router Compatibility

If you are buying a table for a router that you already own, it is important to verify that it can mount to the table properly. Many tables now come with multiple plates that match the common router body styles in the market. If you are buying the router along with the table, matching table and router brands help to eliminate many issues.

➡️ Router Table Space

The tables available on the market vary in size. One brand’s table may have a footprint that is twice another brand’s size. Keep in mind the space available in your shop or garage.

If your table is mounted on a workbench surface, make sure to use the proper fasteners, as well as bolts and washers.

💡 Safety tips when using a Router Table

Some tips can help you use the product much more safely when using a routing table. We all know that router tables are relatively safe, but one must take all the necessary precautions and steps to avoid injuries, especially if you are just a beginner. These include:

  • Always make sure that before you start using a routing table, wear dust masks, safety glasses, and ear muffs to protect your vital organs from and harm.
  • Always make sure the fence of the router table is properly set up before use.
  • Fix the bit correctly so it doesn’t come off during operation.
  • When routing, always start out by feeding the wood from the right to the left.
  • Before making any change concerning the bits, make sure you switch off the device from the power plug.
  • If peradventure you are using a smaller wood, consider holding it in place using a clamp tool found on the router table.

These tips will go a long way toward helping you maintain and achieve the best possible result when using a router table.


Kreg PRS1045 Router Table

Heavy Duty Router Table
  • 24″ x 32″ router table
  • 36″ T-square style router table fence
  • Multi-purpose steel stand is adjustable from 31″ to 39″ in height

A stand-out feature for this router table is the fence lock. Its quarter-turn operation allows it to be tightened with one while also allowing users to remove it quickly for free handwork. Advanced woodworkers will appreciate that versatility.

The table surface is large and smooth, allowing you to move pieces of varying sizes across it easily. The table height can be adjusted from 29 to 35 inches, something that taller joiners will be happy to see. It also comes with Kreg’s T-track for a miter gauge, and the fence has a measuring scale to aid with setup.

Kreg PRS1045 Router Table

This router table can be recommended, especially for advanced woodworkers who use the table a lot.

  • Heavy-duty steel frame makes the table very stable during use
  • Fence operates smoothly and can be adjusted with one hand
  • Fence stays firmly in place once the dual locks are engaged
  • The 20 x 28-inch footprint will require more space than another router table would
  • Very high price point when compared to benchtop designs
Overall Impression
The Kreg PRS1045 Precision Router Table System is undoubtedly one of the best router tables you can find in the market. It is capable of handling most woodworking tasks. This router table is stable, durable, and easily carried from one place to another.

Where to buy


Bosch RA1181 Router Table

Best Router Table with Dust Collection
  • Dedicated standard dust-collection port
  • For extended work area, durability, and precision
  • Extra Tall Aluminum Fence

This entry by Bosch offers users many accessories along with the table. It includes feather boards, multiple plates, two guards, and a sacrificial fencing face. The on/off button is located on the front of the table.

All surfaces match up evenly, helping to prevent your project from catching as you run it along the fence. The track system is smooth and provides a secure purchase for the miter gauge. A clear guard helps to cover the bit while allowing you to see.

Bosch RA1181 Router Table

The channel that the bit sits in provides plenty of clearance. The table is noisy to operate due to the light framing, and it generates a bit of vibration when the wood router is turned on. The feather boards do hold the wood project without snagging, and its MDF faceplates offer a sacrificial surface that protects the other parts of the fence. This product is recommended for the woodworker looking for a complete package straight out of the box.

  • Includes many accessories
  • 2.5-inch dust collection port
  • Comes with a one-year warranty
  • Open base allows more debris to escape
  • Lighter material used in the frame generates more noise
Overall Impression
I would mostly recommend the Bosch Benchtop Router Table RA1181 to people who take their woodworking job seriously. Be careful with the storage of this product, though.

Where to buy


Bosch RA1171 Router Table

Best Router Table with Offset Fence
  • Two Dedicated Dust Ports
  • Aluminum Mounting Plate
  • Extra Tall Aluminum Fence

This cabinet router table from Bosch is designed to work with thicker stock than other models, thanks to the fence that stands nearly five inches in height. A multitude of accessories, including feather boards and guards, help to secure workpieces and provide additional safety when the router is on.

This router table will perform similarly to the Bosch product reviewed above, with two exceptions. First, the router will generate less noise when placed inside the cabinet.
Secondly, this closed cabinet will help to keep debris from moving around. However, you will have to inspect the interior by eye to ensure that it does not clog. 

Bosch RA1171 Router Table

This table is recommended. The function and safety features added to the design make it an excellent table to work on.

  • A 4 7/8-inch high fence supports taller stock than standard fence sizes
  • Two feather boards provide extra support and help to reduce kickback
  • A closed cabinet helps to keep wood chips and dust contained for easier cleanup
  • This model does not include a miter
  • The cabinet door will require clearance towards the front of the router for easy access
Overall Impression
The Bosch Cabinet Style Router Table RA1171 is a great router table. The only problem with this table is that it provides a limited platform or space for its users to work on. TL;DR: I do recommend the Bosch Cabinet Style Router Table RA1171.

Where to buy


Kreg PRS2100 Router Table

Simple Stability
  • Rugged steel stand with vibration-dampening rubber feet
  • Edge-banded reinforced MDF top (16″x24″)
  • Full-size router insert plate (9-1/4″x11-3/4″x3/8″) with 3 Level-Loc Reducing Rings

This router table is small enough to move around job sites or throughout a shop. When combined with the steel frame and aluminum fence, Kreg offers a dependable table for professional carpenters and interior contractors. It has an edge-banded top made from MDF that will remain stable with use. It has been covered with materials that offer smooth movement along its surface. 

Kreg PRS2100 Router Table

With the solid build of this item, it can be recommended for users that put a lot of time in on their router table.

  • It has a steel frame that provides a lot of durability to the structure of this table
  • The legs are angled to provide a wide stance that will increase the stability of the table while it is in use
  • Bottom-up plate levers help to provide a more level setup
  • The aluminum table is weaker in design than the steel frame it sits upon
  • Its MDF top may weaken the plate connection points that are screwed into it
Overall Impression
The Kreg PRS2100 Bench Top Router Table is in no way a professional router table, but it can get the work done. The fence of this device is easily adjustable, and setting the router table up does not take time like most products. It deserves its place in this “Best Router Table” ranking.

Where to buy


Skil RAS900 Router Table

Best Router Table with Stand
  • Two featherboards help guide the workpiece for more accurate routing
  • Bit height gauge helps simplify setup and improves the accuracy of cuts
  • Starter pin and guard help support workpiece when routing curved edges

Are you on a budget? If so, consider getting the Skil RAS900 Router Table because this product provides its users with the specifications of a full-sized router table. In short, the Skil RAS900 Router Table fulfills all of your routing problems without much damage to the pocket. It features a space with storage containers for accessories that one can use alongside the router table. It also has a clamp system built to be easy and fast, ensuring you get your project done on time. The Skil RAS900 Router Table comes with two feather boards that help woodworkers guide their wooden projects. 

The Skil RAS900 Router Table can take a variety of routers, and it is an adjustable bit system that makes it easy to use, mainly when you need to change the router at a point in the future.

Skil RAS900 Router Table

The tabletop of this product is MDF with a smooth laminated surface, and the base is made up of hard-wearing plastic. This makes it perfect to slide wood across. The fence of the Skil RAS900 Router Table is adjustable and can fit every type of material you want to work with.

  • Budget-friendly
  • Can take a variety of routers
  • Sturdy and strong design
  • Can be easily stored
  • Comes with two feather boards
  • Top plate is laminated, not aluminum
Overall Impression
This router table is perfect for newbies and beginners looking for a full-sized router table and not a mounted one. Although it is sold at a meager price, it can also handle some professional-level jobs. It can also house any router, either through the provided hole or self-drilled ones.

Where to buy


JESSEM Mast-R-Lift Excel II Router Table

Best Router Table with Lift
  • 32″ x 24″ phenolic table
  • Aluminum extruded miter track & T-track
  • Extruded aluminum router table fence

This table includes the Mast-R-Lift Excel II, a design feature that should allow most cylindrical routers to mount onto the table without issue. A remote power switch and digital readout are available for use with this router table.

It comes with a steel stand that provides plenty of rigidity while the router is being used. That stability is increased with a multitude of stretchers. Solid metal dials allow for smooth adjustability that is also very accurate. An extruded aluminum fence offers a stable platform for adjustable faces.

JESSEM Mast-R-Lift Excel II Router Table

The price will be prohibitive for novice woodworkers and casual hobbyists. However, I can recommend this product to seasoned woodworkers and professional joinery shops.

  • The larger table area measures 24 x 36 inches includes both miter and T-track
  • It has fully adjustable fence faces that can be adjusted for each piece that you work on
  • Upper and lower stretchers help to increase the stability of this router table
  • The design elements may be overkill for beginning woodworkers and casual hobbyist
  • It has a high price tag that does not include a router in the package
Overall Impression
The JESSEM Mast-R-Lift Excel II Included Complete Router Table System is made of extruded aluminum which has an adjustable fence face. It has a steel stand which makes the product robust and sturdy, resulting in low casualties.

Where to buy


Grizzly G0528 Router Table

Best Router Table without Router
  • Accepts any brand of portable router from 3/4 HP to 5 HP
  • Main table surface: 30 3/4-Inch x 9 7/8-Inch
  • Sliding table surface: 30 3/4-Inch x 12 1/4-Inch

If you are an enthusiastic woodworker, you should consider a good router table like the Grizzly Industrial G0528 Router Table. This product helps its users improve their routing skills and further their career to a professional part. The Grizzly Industrial G0528 Router Table comes with a vast surface with an area of about 31” x 10”, which is enough for various woodworking projects. This table is compatible with most routers out there in the market, having a hp of about 0.75 to 5, and it is made out of cast iron for more durability.

Grizzly G0528 Router Table

The Grizzly Industrial G0528 Router Table offers other minor small that look prominent and useful, such as a sliding table and a safety paddle switch. The sliding table is handy when users want to raise the panels making safety during operation an option. One feature that made us love this table is the safety paddle feature located at the frame of the product. This makes it easy to flip the switch on or off without bending like other tables.

  • Made from cast iron while the legs are made from aluminum
  • Strong and stable design
  • Easy to set up and use
  • Power button strategically located on the frame
  • Fence has a poor structure
  • Quite pricey
Overall Impression
When users purchase the Grizzly Industrial G0528 Router Table, they will find out that it is worth the hassle, and it is an excellent purchase if they are planning on furthering their woodworking skills. Using it is incredibly safe and easy to use as well. With the Grizzly Industrial G0528 Router Table, you can learn so much.

Where to buy


Kreg PRS1040 Router Table

Best Router Table with Height Adjustment
  • Dual reducing rings (2 inches; 1-13/16 inches)
  • 9-1/4 by11 3/4 by 3/8-inch thick phenolic insert plate
  • Fully enclosed, aluminum fence for superior precision and dust collection

A professional-grade build intended for heavy-duty use on job sites and commercial shops. This build helps to ensure precision thanks to its track system that keeps surfaces parallel to the fence throughout the routing process.

Mount the router on the Kreg PRS1040 Router Table

A stand-out with the fence is the enclosure that helps trap debris, making dust collection easy. It has adjustment knobs that are easy to use while providing a very secure purchase. This design is intended for professional contractors and serious hobbyists. That makes this an item that can not be recommended for most DIY builders or casual hobbyists.

  • Its MDF top helps to reduce noise and vibrations.
  • The laminate surface is smooth, allowing pieces of wood to move even across them
  • There is an automatic squaring feature that improves your accuracy and speed
  • High price
  • 85-pound frame will require a lot of shop space

Where to buy


Craftsman Router and Router Table Combo

Best Table with Router Combo
  • The table gives you 334 square inches of smooth working surface
  • The long-lasting router has a 1 3/4 horsepower motor
  • 1-1/4″, 1-1/2″, and 1-3/4″ Dust extraction port

The materials used in its construction feel durable. The 9.5-amp motor of the included router provides plenty of power to cut through most woods without issue. The table itself has a larger footprint, a feature that will aid in the overall support of your project as it sits on the table

This combination kit works adequately on most fine woodworking jobs. It includes accessories like feather boards, which aid in securing the pieces while keeping your fingers at a safe distance. It will generate a bit of noise during operation, and the debris may scatter due to its open base

Craftsman Router and Router Table Combo

A Power strip has been fitted under the table to allow you to plug tools in at the table instead of an outlet. This router table can be recommended, especially to those who will need a router and the table.

  • Package includes a router that matches the table layout
  • Has 334 square inches of table space
  • Legs on the stand are tiny and feel flimsy
  • Power strip is hidden beneath the table

Where to buy


Goplus Electric Aluminum Router Table

Best Router Table for Beginners
  • Extra Large Extension Table to the Main Table
  • Retractable Guard and Suits Most Router Bits
  • Multifunctional Fence and Exact Miter Gauge

Goplus has provided a compact and lightweight router table designed for light and medium workloads. The table is short, allowing to be a candidate for mounting directly to workbenches that sit lower to the ground

The small table will allow users to make cuts with most router bits but will not provide adequate support without the extensions located on each side. It has a fence that is also small. That will give you enough surface for smaller projects, but it might be a bit small bigger pieces.

Goplus Aluminum Router Table

For those with router experience and those upgrading from a previous table, this product will probably be of limited use. With a budget-friendly price point and small footprint, this router table could be recommended for someone who is just building up their woodworking shop, as well as those who have limited table router experience.

  • The small footprint of this table will fit almost anywhere your woodworking
  • It comes to a very budget-friendly price point that is geared towards new or casual users
  • This also includes table extensions for each end that allow it to come in at a more respectable size
  • This table might be too small for those larger projects requiring round overs
  • The materials used to build this table are not of the highest quality
  • It has a shorter fence that does not make a lot of contact with long pieces of wood

Where to buy

Comparison Table

Product NameWeight (lbs)DimensionsWorktop (sq.in.)
Kreg PRS1045 Router Table 7037 x 25 x 361200
Bosch RA1181 Router Table3427 x 18 x 14486
Bosch RA1171 Router Table 454 x 27 x 24370
Kreg PRS2100 Router Table 28.419.2 x 30 x 4.8384
Skil RAS900 Router Table 31.528 x 9.25 x 17.75
JESSEM Mast-R-Lift Excel II 96.739 x 9.6 x 40.2768
Grizzly G0528 Router Table 10235.2 x 26 x 7.8Main table surface:
31″ x 10″
Sliding table surface:
31″ x 12″
Kreg PRS1040 Router Table 9338 x 26 x 91200
Craftsman Router and Router Table Combo 2526.3 x 15.9 x 14.7334
Goplus Aluminum Router Table 11.9519.1 x 14.4 x 5.6450

Frequently Asked Questions

Can a plunge router be used in a table?

Yes, you can use a plunge router in a table. As long as the depth adjustments lock securely, a plunge base can be fixed onto the table and operated safely.

Are router tables universal?

Not necessarily. While most handheld routers will fit onto most tables, the tables must have an adaptor plate that accommodates the size and style of the router you plan to use. Tables listed as “universal” often have multiple plates that will connect to the most popular brands, but there is no universal table that accepts every router.

What can I do with a router table?

There are many jobs you can perform on your router table:
– Make accurate stop cuts
– Creating grooves or slots
– Trimming the edges of the wood
– Make dovetails or other woodworking joints
– Cutting and shaping molding

Does size matter?

The size will matter during operation. Larger routers will come with a greater range of adjustments, allowing you to perform deeper cuts. A bigger table will offer more support while you cut and trim the wood piece. A wider base will usually translate into a more stable table surface.

Should I buy a workbench?

Absolutely. A dedicated work surface offers you the proper surface to cut and shape wood for your projects. A workbench will also provide you with plenty of vise mounting options. Finally, a workbench can provide you with a surface to place power tools on while you use them.

Why do feather boards matter?

A feather board will consistently hold the wood along the fence of your router table. It can also apply pressure close to the router head more safely than your fingers can.

Who makes the best router table?

The answer to this will depend upon what you desire from a router table, as each woodworker’s needs are different. Reputable manufacturers such as Bosch or Kreg are known to offer more than one model with features that many users prefer.

Final Thoughts

The best router tables discussed previously offer a variety of options that should cover most of the woodworker’s budgets and needs. Keep in mind the materials that the router table is made from, as stability and durability are critical when routing. Table fences and miters should provide correct angles for the wood pieces to sit, and these components should move smoothly and lock down securely.

Many accessories, such as feather boards, can be made or purchased for your router table. These accessories and jigs will allow you to work safely and can speed up your workflow greatly. Keep an eye out for future additions to router table functions, including adjustable tables that can be placed at an angle with accuracy with the addition of built-in digital components.


Brayden Silva

Hand-made furniture, remodeling projects, and consulting on all your home needs! I've been a carpenter for over 10 years and I'm still loving it. I learn a new skill every day and can talk your ear off about it! I love to make things. I've been doing it my whole life. Check out my blog for some of my latest projects!

We will be happy to hear your thoughts

Leave a reply

5 images maximum / 31.25MB per image / jpeg, pjpeg, png, gif

Enable registration in settings - general
Shopping cart