Go to Buildeazy Home Page color break
   
Home   
Contents   

Custom Search

 
Rabbit hutch plans
rabbit hutch
Copyright © Buildeazy.Com Ltd.
For more information click here




How to make
an indoor Rabbit Hutch
Page two: Plans and materials list   Page 2 of 3  
Below are the plans and materials and cutting list for the indoor rabbit hutch.
Use as reference in conjunction with the instructions in the next page.
rabbit hutch side and rear elevation
rabbit hutch top and front elevation
rabbit hutch arm, handle and middle panel

Materials list

Material Used For Amount and size
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Side panels 2 pieces @ 1050mm (42") x 575mm (23")
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Floor panel 1 piece @ 1050mm (42") x 500mm (20")
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Front panel 1 piece @ 530mm (21 1/4") x 430mm (17 1/4")
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Rear panel 1 piece @ 530mm (21 1/4") x 575mm (23")
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Top panels 1 piece @ 610mm (24 3/8") x 560mm (22 1/2")
1 piece @ 500mm (20") x 560mm (22 1/2")
15mm (5/8") or thicker sheet panel such as plywood, mdf board or any other similar type of sheet panel wood. Middle panel 1 piece @ 500mm (20") x 500mm (20")
50mm x 50mm (2"x2") wood Rear legs 2 pieces @ approximately 675mm (27") long
70mm (2 3/4") wood Horizontal members above and below the front panel and for the handle arms 2 pieces @ approximately 530mm (21 1/4") long
2 pieces @ 425mm (17") long
25mm (1") diameter dowel (round wood) Handle 1 piece @ 570mm (22 3/4") long
90mm x 70mm (2 1/2" x 3 1/2") wood Wheel and axle support 1 piece @ approximately 380mm (15 3/8") long
Hinges Front hatch, top hatch and side door 6
25mm (1") gap welded mesh Front and side panel openings 3 pieces @ approximately 450mm (18") x 450mm (18")
OTHER STUFF......
You will also need a couple of wheels, a couple of bolts at least 150mm (6") long to use as axles, a bit of metal strap to fix the axles to the wheel and axle support , assorted screws, a bit of glue and three door and hatch latches or something similar that can keep the hatches and door shut..

<<< Previous page      Next page >>>

  • Page one: Introduction and photo
  • Page two: Plans and materials list
  • Page three: Instructions





  •    
    Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material
    in this website is strictly prohibited without expressed written permission from the owner.

    Custom Search