buildeazy logo color break
    
a camera

Users Photos and Stories

These pages are dedicated to the DIYers that have completed a buildeazy project and have sent us a picture of the finished product accompanied by a story or comment .

We welcome all photos and/or articles regarding projects from the Buildeazy site. Please send any submissions via the contact us page

Photos and Comments regarding the Plywood Playhouse project.

Click on an image to display a larger version under, followed by a word or two.

plywood playhouse front view plywood playhouse rear view plywood playhouse inside view

plywood playhouse rear view

Hi, I built the plywood playhouse from these plans: https://www.buildeazy.com/workshop/plywood-playhouse-1.html Just finished a couple days ago.
I don't recommend this project for someone with no prior carpentry experience as there are a number of cuts that require angled mitre cuts and some of the plywood cuts are really long. The instructions were fairly easy to follow with only a couple of dimensional hiccups. Foremost, the side walls, using standard 4x8 plywood, do not quite reach the lower roof. I didn't have to trim that edge to fit the slope, which was kind of a relief. However, there is about a 1" gap. Everything else worked pretty well and I love the design. Here are some other changes and comments:
- I used 5/8 plywood on the roof/ceiling to save some money and because 3/4 everywhere seemed a bit overkill. You could run a truck into this thing and the truck would break first.
- I didn't have a workshop space with a tall enough ceiling to finish initial construction inside, so I had to finish installing the roof on-site. This was no problem except for the painting. I definitely recommend painting this thing in panels (per the plans) instead of assembled like I did.
- I skipped the plexi windows because they seemed like the one afterthought in the design, plus I thought it would be better to maintain air flow and keep it cooler inside. We'll see how that works out in the winter. I may change my mind.
- I used one of the scrap pieces of plywood to make a little desk in the back corner.
- I used a router to round most of the plywood edges. They seem less splinter prone this way and seemed to take paint better.
Here are a few pictures.
Thanks for the plans and your website. My 3-year-old son loves it and it's big enough to keep him happy for years!
Ben Malouf