|
How to make a pipe and chain-link mesh fence
|
page:
1
2
3
4
|
Mesh laid out, stretched and tied
The chain-link mesh size was 50mm (2") and the wire size was 2.5mm. The height was 900mm (3ft).
The chain-link mesh was rolled out along the fence line and secured to the first post with tie wire.
The mesh was then stretched by hand to the next post and fixed to the post with tie wire
and to the line wire with tie clips.
This took two men: one to pull the mesh taut while the other fixed it in place with the tie wire and clips.
|
|
