Go to Buildeazy Home Page color break
   
Home   
Contents   

Custom Search

 

Kid's DIY Section
young wood workers
Copyright © Buildeazy.Com Ltd.


making a kid size picnic table
metric version
kids picnic table
<<< previous page   1   2   3   4

the instructions continued

5 Screw the brace to one side
Screw the brace (d) to one of the assembled side frames.

The top of the brace (d) should be flush (i.e. even) with the top of the tabletop support (b). Screw through the pre-drilled screw holes in the centre of the tabletop support (b) and into the end of the brace (d).

  assembling the kids picnic table

6 Screw the brace to the other side
Screw the brace (d) to the other assembled side frame.

Take special notice of the picture to ensure the side frames are the right way around.

  assembling the kids picnic table

7 Screw the seat boards in place
Line up the screw holes in the seat boards (f) so they are over the seat supports (c). Also check that the two seat board supports (c) are 620mm apart.

You can then screw the seat boards (f) in place.

  assembling the kids picnic table

8 Screw the tabletop boards in place
Center the middle tabletop board (e) and screw in place.

Place the remaining two boards, one each side of the middle board and also screw in place.

Finished!

  assembling the kids picnic table
<<< previous page   1   2   3   4


To read people's comments about this project click here

To make a comment about this project email us via the contact us page




   
Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material
in this website is strictly prohibited without expressed written permission from the owner.
Custom Search