|
Identifying the Members
|
Page 2 of 21
|
Wall
[w1] 100x50 (2x4) framing lumber
[w2] Building wrap, cover underlay or similar.
[w3] Cement fibreboard - lap siding 240mm wide x 7.5mm thick (9 1/4" wide x 5/16" thick)
[w4] Interior plywood lining approximately 7mm (11/32") thick
Roof
[r1] Common rafter. 100x50 (2x4)
[r2] Fly rafter. 100x50 (2x4)
[r3] Outrigger. Blocking between common rafter and fly rafter. 100x50 (2x4)
[r4] Ridge beam. 100x50 (2x4)
[r5] Lower horizontal roof frame member. 100x50 (2x4)
[r6] 12mm (1/2") plywood roof sheathing
[r7] Building wrap, cover underlay or similar.
[r8] Cement fibreboard - lap siding 240mm wide x 7.5mm thick (9 1/4" wide x 5/16" thick)
[r9] Fascia board. 150x25 (1x6)
[r10] Barge board. 150x25 (1x6)
[r11] Galvanized metal ridge cap
[r12] Barge cap. 100x25 (1x4)
[r13] Gable truss frame. 100x50 (2x4)
[r14] Ridge beam support. 100x50 (2x4)
Floor (lumber)
[f1] Skid. 100x100 (4x4) treated or suitable for outside use
[f2] Joist. 100x50 (2x4) treated or suitable for outside use
[f3] Rim/boundary joist. 100x50 (2x4) treated or suitable for outside use
[f4]
18mm (3/4") plywood floor
NOTE: This complete plan-set can also be purchased in downloadable PDF format free of advertising and print friendly for only $5. For more info
click here
<<< Previous page
Next page >>>
|
