Table of Contents
- 1Introduction
- 2Identifying the parts
- 3The plans
- 4Wood sizes | Shopping list | Cutting list
- 5Instructions | The legs
- 6Marking the leg X joints
- 7Joining the legs
- 8Adding the end rails to the legs
- 9Drill bolt holes through the crosses
- 10Drilling holes into the ends of the braces
- 11Fixing the brace members in place
- 12Just the tabletop and bench top boards to go
- 13Done!
Identifying the parts
[a] table top and bench top boards
[b] table braceTo make rigid. and seat brace
[c] table legs
[d] table rails
[e] bench legs
[f] bench rails
[b] table braceTo make rigid. and seat brace
[c] table legs
[d] table rails
[e] bench legs
[f] bench rails
What degree are the picnic tables usual legs? The cross pieces. On a regular table as well. “X”