Table of Contents
- 1Introduction
- 2Step 1. Cut the boards and mark the trenches
- 3Step 2. Set the depth of the power saw blade
- 4Step 3. Make cuts along the cut-out area
- 5Step 4. Clean out the grooves
- 6Step 5. Prepare and mark the opposite side
- 7Step 6. Cut the opposing trench
- 8Step 7. Clean out the opposing trench
- 9Step 8. Make some half-height boards
- 10Step 9. Lay the bottom row of boards
- 11Step 10. Stack 'em up
Step 10. Stack ’em up
Continue adding boards until they are all fitted or you have reached the height you desire.
Finish off with two half-height boards to make the top even.
Leave a Reply