buildeazy logo color break
    
molded concrete seat
BuildEazy Logo  See this page at https://www.buildeazy.com/

How to make a concrete seat

Recommend  

Table of Contents

Cover
  • Cover
Page  1
  • About the Author
  • Copyright Notice
  • Disclaimer
  • Help Resources
Page  2
  • Table of Contents
Page  3
  • Preface
Page  4
  • Introduction
Page  5
  • About the measurements
  • Materials you will need
  • Informative notes
Page  6
  • Cutting list for the form (mold)
Page  7
  • The plans - dimensions
  • Cutting detail for pieces (e)
Page  8
  • The plans - schematic view
Part 1. Making the form (mold)
Page  9
  • Step 1.1: Cutting and assembling the frame pieces of the seat form
Page  10
  • Step 1.2: Cutting the plywood, the plastic, and assembling the seat form
Page  11
  • Step 1.3: Cutting the form pieces for the legs
Page  12
  • Step 1.4: Assembling the forms for the legs
Page  13
  • Step 1.5: Aligning and bolting the leg forms to the seat form
Part 2. Preparing the reinforcing
Page  14
  • Step 2.1: Cutting the mesh
  • Step 2.2: Shaping the mesh
  • Step 2.3: Tying the mesh
Part 3. Mixing the concrete
Page  15
  • Concrete mix information
Page  16
  • Step 3.1: The dry mix
  • Step 3.2: The wet mix
Part 4. Casting the concrete
Page  17
  • Step 4.1: Applying the release agent
  • Step 4.2: Half-filling the seat form
  • Step 4.3: Placing the reinforcing
Page  18
  • Step 4.4: Topping up the seat form
  • Step 4.5: Attaching the leg forms to the seat form
Page  19
  • Step 4.6: Topping up the leg forms
Page  20
  • Step 4.7: Releasing the leg forms
Page  21
  • Step 4.8: Releasing the seat form
Page  22
  • Appendage: Easier options
Page  23
  • User photos and/or comments

Note: This complete project (all the pages together in one handy PDF ad-free file) can be purchased online and downloaded immediately to your computer for only $5.  Grab here.

To view all available plans in downloadable PDF file click here.

[<< Previous Page] [Table of Contents] [User Comments/Photos] [Next Page >>]