Go to Buildeazy Home Page color break

Custom Search


Kid's DIY Section
young wood workers
Copyright © Buildeazy.Com Ltd.

how to make a scooter
this is the metric version - go to the feet and inches version
kids wood scooter
1   2   3   4   next page >>>

user comments/photos

Simply Measure, Cut, Drill & Assemble!
This scooter is an example of how something mechanical can be made just by using standard materials that can be purchased from most building supply stores. This project should be undertaken in conjunction with a capable adult. This basic project involves cutting the pieces of wood to length, marking where the holes are to be drilled, drilling the holes and simply bolting the pieces together.

helpful tips

bullet Using good quality tools (such as those made for adults) makes the task easier.

bullet Use a sharp 8 point (i.e. 8 teeth per inch) handsaw for general cutting. If you are not experienced in using handsaws, use blocks of wood and clamps to act as a saw-guide. Do not use your hand for a guide.

bullet All electric tools should be used by a capable adult, unless under strict supervision. Even if only using a non-electrical hand drill, goggles should still be worn as a drill bit might snap and fly through the air.

bullet Screwdriver handle should be big enough to ensure a good grip. Square head screw drivers (with appropriate screws) tend to slip less.

kids safety goggles
cutting wood

1   2   3   4   next page >>>

Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material
in this website is strictly prohibited without expressed written permission from the owner.
Custom Search