Go to Buildeazy Home Page color break
   
Home   
Contents   

Custom Search

 
Free woodworking
Plans & Projects
free woodworking plans and projects
Your photos of buildeazy d.i.y. projects
Subscribe to be notified of new projects
Copyright © Buildeazy.Com Ltd.

Guide to building a Shell only
Single Garage
page:   1   2   3   4   5   6   7   8   9
  10   11   12   13   14   15

Page 12: Materials list

The Materials List
Amounts have been added on to allow for wastage. Stock sizes are nominal sizes(see glossary)
Excludes flashings and hardware such as nails and other fixing or fastening components.
ID   Size (nominal) Comments Quantity
Foundation Concrete   For footing holes .6 cubic metre (3/4 cubic yard)
Sub-floor Posts/Piles 100x100 (4x4) OR 125x125 (5x5) Natural decay-resistant lumber or treated for in-ground applications. 9m (30ft)
Framing
Wall
Bottom Plate 100x100 (4x4) Natural decay-resistant lumber or treated for in-ground applications. 19m (62ft)
Framing
Wall/Roof
Top Plate; Studs; Trimmer Studs; Cripple Studs; Header; Nogging; Rafters; Cleats 100x50 (2x4)   200m (656ft)
Framing
Roof
Ridge Board 150x25 (1x6)   6m(20ft)
Framing
Wall
Header 200x50 (2x8)   5.4m (18ft)
Framing
Ceiling
Ceiling Joists 150x50 (2x6)   26m (85ft)
Framing
Roof
Purlins 75x50 (2x3)   38m (125ft)
Framing
Eaves
Ribbon Plate 50x50 (2x2)   12m (20ft)
Framing
Eaves
Sprockets 75x40 (1-1/2x3)   5m (16ft)
Roof Trim
Garage Door Trim
Fascia; Barge Board; Door Trim 150x25 (1x6)   28m (92ft)
Eaves Lining Fibre-cement Sheet (or other soffit board) 4.5 (3/16") thick   3.6sq m (40sq ft)
Roof Underlay Roof Underlay     21sq m (226sq ft)
Siding Underlay Siding/Cladding Underlay     40sq m (430sq ft)
Roofing Iron Corrugated     21sq m (226sq ft)
Siding/Cladding Plywood 2400x1200x12 (4ftx8ftx1/2")   14 sheets
Roof Bracing Strap Brace 25x1 (1/16x1") Tensioners on each plane (4 of) 25m (80ft)
Exterior Battens Vertical Joins; Corners. 75x25 (1x3)   90m (300ft)
Exterior Beading Under Eaves Beading 25x25 (1x1)   12m (40ft)

Click on a hyperlink below to go to that page.

CONTENTS
bullet Page 1: Introduction
bullet Page 2: Identifying the parts
bullet Page 3: Flat plan
bullet Page 4: The wall frames
bullet Page 5: The roof
bullet Page 6: Detail
bullet Page 7: The eaves
bullet Page 8: The exterior cladding
bullet Page 9: The roof cladding
bullet Page 10: The angle cuts
bullet Page 11: Bracing and fastening
bullet Page 12: Materials list
bullet Page 13: Cutting list
bullet Page 14: Glossary of terms
bullet Page 15: A guide to building the garage

<<< Previous page     Next page >>>



   
Copyright © Buildeazy.Com Ltd. All rights reserved. Reproduction of any material
in this website is strictly prohibited without expressed written permission from the owner.
Custom Search