Table of Contents
- 2About the wood measurements
- 3Identifying the pieces
- 4Plans - Individual pieces and cutting list
- 5Plans - Side sections
- 6Plans - Front view
- 7Plans - Top view and materials list
- 8The seat base
- 9The seat and legs
- 10The tabletop and arm supports
- 11The tabletop boards and supports
- 12The arm
- 13A few pictures
Plans – Top view and materials list
Materials List – Altogether you will need….
• 7 meters (24ft) of 100 Abbreviation for millimeter which is a metric unit of length equal to one thousandth of a meter. 25.4 mm equals one inch. x 50 mm (2″ x 4″) stock suitable for exterior use.
• 20 meters (67ft) of 150×50 (2″ x 6″) stock suitable for exterior use.
• Two 200 mm (8″) strap hinges and screws to suit.
• Eight 10 mm (3/8″) Covered with a protective coating of zinc. Are round headed bolts with square shoulders that resist rotation when located or driven into place. They can be called coach bolts or carriage bolts depending on which part of the world you live in. The head end of the bolt does not need a washer, but the other end of the bolt (the nut end) usually does. 110 mm (4 1/2″) long.
• 150 Timber, lumber. The hard fibrous lignified substance under the bark of trees screws 90 mm (3 1/2″) long. Suitable for exterior use.
• 40 galvanized nails 90 mm (3 1/2″) long.
• Eight 150 mm (6″) x 30 mm (1 1/4′) wide galvanized Short lengths of metal strap 25×1 (1/16×1) used to fix members together to resist uplift. ties
• Two 10 mm (3/8′) thick x 150 mm (6″) long galvanized rod or wood A round wooden pin that is used to reinforce a wood joint. The round wooden pin fits into corresponding holes in adjacent pieces of wood and helps fastens them securely together.