Table of Contents
The angle cuts
The roof frame members
Cut the roof frame members to the Any of the three linear measurements, length, breadth and depth. shown.[j] Structural member of a roof that supports the roof load and runs from the ridge to the top of the side walls.
100×50 (2×4) stock. Cut to dimensions shown. 16 lengths required.[k] A horizontal framing member to which ceiling linings are fixed.
150×50 (2×6) stock. Cut to dimensions shown. 8 lengths required.[l] A short horizontal member that ties opposing rafters together immediately below the ridge board.
100×50 (2×4) stock. Cut to dimensions shown. 8 lengths required.NOTE: Cut one How much the teeth are angled out on a circular saw blade. first (2 rafters, 1 cleat and 1 ceiling One of a series of parallel members used to support the floor. Part of the framing that provides the structure for a floor.) and try for size and fit, before pre-cutting the entire roof frame.