How to build a 2100mm x 2400mm (7ft x 8 ft)
Board-and-batten Shed
NOTE: This complete plan-set can also be purchased in downloadable PDF format free of advertising and print friendly for only $5. For more info
click here
|
This page shows the shed floor layout (fig.1), the shed roof layout (fig.2) and the wall stud placement (fig.3).
There are some explanatory notes below the drawings.
fig.1 - Floor layout
The floor layout plan gives the overall dimensions of the floor frame.
The floor frame is constructed of 100x50 (2x4) joists [b] and end joists [c]
and sits on 100x100 (4x4) skids [a] .
All floor frame lumber should be treated or otherwise suitable for exterior use.
Individual member lengths are given in the
Parts List on Page 1.
fig.2 - Roof layout
The shed roof layout plan gives a birds-eye view of the roof frame layout.
The members shown in the roof frame plan are the side wall top plates [g], the front and rear wall raking top plates
[l], the middle rafters [z], the collar ties [z1] and the ridge blocking [n].
All the members in the roof frame are 100x50 (2x4) stock.
Individual member lengths are given in the
Parts List on Page 1.
Drawings showing individual member lengths and angle cuts are in the
Plans, Front and Roof
fig.3 - Stud layout
The shed stud layout plan gives a birds-eye view of the wall stud layout.
More detail, placement measurements as well as individual member lengths and angle cuts are shown
in the
Plans, Front and Roof
and the Plans, Rear and sides
|
