BuildEazy Logo color break
BuildEazy Logo  See this page at
a camera

Users Photos and Stories

These pages are dedicated to the DIYers that have completed a buildeazy project and have sent us a picture of the finished product accompanied by a story or comment .

We welcome all photos and/or articles regarding projects from the Buildeazy site. Please send any submissions via the contact us page

Photos and Comments regarding the Hexagonal Picnic Table project.

hexagonal picnic table built from a BuildEazy plan

I built this table back in July for my wife's birthday, she was extremely happy as this is a plan she picked out for me to build for her.
I worked on this project off and on for three days, I have a large stack of treated lumber but only had 2x8's so i ripped each and every board to the 2x4's needed for the spokes and the 2x6's needed for the seat and top boards. I chose to use 2x6's for the legs because of the weight factor and to maximize the life span of the table.
I built this with the old plan and did have trouble understanding the directions for the angles on the spokes, but after some trial and error and a few misscut boards i figured it out. I did decide to use an 18" circle of 3/4 plywood underneath the bottom spokes with glue and screws for strength and i also added 2x6 runners cut on the same 30 degrees underneath the center of the seats for better support. if you look at the picture you can see the circle underneath as well as the additional runners underneath the center of the seats.. the entire table was put together with 3" wood screws and is solid as a rock, it is also extremely heavy and I am sure it will be in our backyard for many years to come..
Charles Medlin
Rockwood Tennessee