Table of Contents
Building instructions continued
4.) Cut and trench the A shelter of vines or branches or of latticework covered with climbing shrubs or vines. A walk through Garden structure that can support plants and generally complements the landscape. rafters
Cut the five rafters to length (see the arbor plan (Page 2) for Any of the three linear measurements, length, breadth and depth.) and then clamp them altogether.
Next trench (checkout, An L-shaped cutout with one side, that is always at an end or side of a member, unlike a notch that is a U-shaped cutout.) the rafters in the same manner as the beams were trenched in step 2.
5.) Position the arbor rafters
Position the rafters in place on top of the beams. (See the arbor plan (Page 2) for dimensions). The rafters can be fixed in place with 4″ (100mm) (Covered with a protective coating of zinc. nails through the top of the rafters into the beams.
That’s it. Enjoy!