Identifying the parts
The cutting list
Note 1:. Items (1), (2), (6), (8), and (9) in the table below should be Timber, lumber. The hard fibrous lignified substance under the bark of trees suitable for exterior use. Read the notes on the previous page for information on measurements, wood sizes, alternatives and Pressure treated. Refers to lumber that is treated in such a way that the sealer is forced into the pores of the wood. Refers to lumber pressure sprayed with chemicals to lengthen its life expectancy for outside use or inground applications. Any of the framing wood..
Note 2:. If you use Surfaced; planed; smooth; even surface; gauged. (smooth, See Dressed., planed) lumber for the frame, then items (4) and (5) will have to be cut accordingly. They will need to be slightly longer than the lengths given below.
|ITEM No.||MATERIAL / SIZE||AMOUNT AND LENGTH||DESCRIPTION|
|(1)||2″ x 2″ (50mm x 50mm)||3 @ 48″ (1200mm)||Under floor skids|
|(2)||1″x 6″ (150mm x 25mm)||8 @ 31 1/4″ (780mm)||floor boards|
|(3)||2″ x 2″ (50mm x 50mm)||4 @ 31 1/4″ (780mm)||end wall plates|
|(4)||2″ x 2″ (50mm x 50mm)||8 @ 14″ (350mm)||studs|
|(5)||2″ x 2″ (50mm x 50mm)||2 @ 44″ (1100mm)||side wall plates|
|(6) & (8)||1 Any broad, thin surface. 3/8″ (9mm) exterior A piece of wood made of three or more layers of wood veneer laminated together with glue..||cut as per plan||The exterior surface of a wall.|
|(7)||2″ x 2″ (50mm x 50mm)||6 @ 22″ (550mm)||rafters|
|(9)||1″x 6″ (150mm x 25mm)||10 @ 60″ (1500mm)||Roofing boards|