Table of Contents
- 1Introduction
- 2Description
- 3Photos of construction part 1
- 4Photos of construction part 2
- 5Explanations
- 6Plans - Front, floor and footprint
- 7Plans - Base, floor, and wall layout
- 8Plans - Top and roof (millimetres)
- 9Plans - Top and roof (inches)
- 10Plans - The sign
- 11Plans - Details
- 12Plans - Fixed walls - metric
- 13Plans - Fixed wall - standard
- 14Plans - Wall/door - metric
- 15Plans - Wall/door - standard
- 16Materials overall
- 17Framing wood by section - metric
- 18Framing wood by section - standard
- 19Cutting list (frame)
- 20Step 1. Cut the frame pieces to length
- 21Step 2. Rip the relevant pieces to the required widths
- 22Step 3. Make the base
- 23Step 4. Make up the pillars
- 24Step 5. Assemble and stand the frames
- 25Step 6. Make the head (top section)
- 26Step 7. Make the walls
- 27Step 8. Install the walls, head, and door
- 28Step 9. Shape and fix the mullions
- 29Step 10. Shape and fix the decorative pillar top pieces
- 30Step 11. Paint time
- 31Step 12. Make the windows
- 32Step 13. Add the 'police call box' sign
- 33Step 14. Final touches (almost)
- 34Roof lamp Introduction
- 35Roof lamp Plans
- 36Sourcing the components
- 37Overview
- 38The lamp container cap
- 39Fibreglassing the cap
- 40The lamp container base
- 41Threaded rod to the cap
- 42Assemble the lamp container
- 43Put in a light or two
- 44The lights go on
Framing woodTimber, lumber. The hard fibrous lignified substance under the bark of trees by section – standard
Note: The dimensionsAny of the three linear measurements, length, breadth and depth. are given in both metricMillimeter measurements. (previous page) and standard (this page). Use one or the other.
For explanations on discrepancies between the two go to the ‘Explanations’ page.
Note: Some stock sizes listed below are not common and therefore have to be ripped (cut lengthwise) out of the standard sizes listed in the ‘ripA cut lengthwise along a board that also runs with the grain. (As opposed to cross-cut.) from’ column.
In other words, rip (cut down lengthwise) the required ‘size’ from the ‘rip from’ size.
Standard measurements
| ID | REQ’D SIZE | RIP FROM | LENGTH | QTY |
|---|---|---|---|---|
| THE BASE | ||||
| 3½” x 3½” | 57½” | 4 | ||
| 1½” x 3½” | 50¼” | 1 | ||
| 1″ x 6″ | 54¾” | 10 | ||
| THE PILLARS | ||||
| [A] | 3½” x 3½” | 87″ | 4 | |
| [B] | 1½” x 6½” | 1½” x 7½” | 91″ | 4 |
| [B2] | 1½” x 5″ | 1½” x 5½” | 91″ | 4 |
| [C] | 1½” x 3½” | 87″ | 8 | |
| THE SIGN HOLDER | ||||
| [E] | 1½” x 6⅛” | 1½” x 7½” | 49¼” | 4 |
| THE INFILL | ||||
| [G] | 1½” x 6⅛” | 1½” x 7½” | 41¾” | 4 |
| THE LOWER HEAD SIDES | ||||
| [F] | 1½” x 7½” | 51¾” | 4 | |
| THE MIDDLE HEAD SIDES | ||||
| [H] | 1½” x 5½” | 48¾” | 4 | |
| THE UPPER HEAD SIDES | ||||
| [J] | 1½” x 5½” | 45¾ | 4 | |
Pages: Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44
Thank you so much for posting this!! My husband has been promising me for years now that he would build a TARDIS for me as my 50th birthday gift (I’ll be 56 in June), but used the excuse that he wants it to be just perfect and can’t do that without either seeing one in person ( not too easy in Colorado) or having plans//blueprints in hand. You’ve made my year!!! 😍
Thanks so much again! You’re fantastic!