How to make a garden platform cart
Page one: Introduction
• Page two: Plans - Parts - Cutting list
• Page three: Instructions steps 1 - 3
• Page four: Instructions steps 4 - 5
• Page five: Instructions steps 6 - 8
This garden push cart was originally made for another specific purpose: we needed some type of implement to stand on in order to trim the top of the hedge.
It had to be something that was stable and yet could be easily moved.
Hence, the push cart.
Anyway, the garden push cart has since became the most useful and utilized implement in the garden and around the yard.
It is used as a standing platform, a plant pot mover, a portable bench seat and the grandkids use it to climb up onto the trampoline.
Not a day goes by without the cart being used for one thing or another.
The push cart is made out of 150mm x 20mm (3/4" x 6") boards for the platform and 90mm x 45mm (1 1/2" x 3 1/2") and 70mm x 45mm (1 1/2" x 2 1/2")
wood for the frame.
The wheels and axle were sourced from an old hand truck.
Next page >>>