Building a wooden sun lounger
Step 5: Unclamping and sanding the wheels
Once the glue has dried, unclamp the wheels and sand them smooth.
Step 6: Assembling the side rails and end rails
Lay the two side rails on a couple of saw horses, and glue and screw the two end rails to them, one at each end.
Pre-drill the screw holes in the end rails prior to fixing.
Step 7: Fixing the front slats
Pre-drill all the screw holes in the front slats, two holes at each end of each slat. Make the holes 1/2" (12mm) in from the sides and 3/8" (9mm) in from the ends.
Fix (glue and screw) the two end slats first (see drawing below), and then add the intermediate slats, making sure they are evenly spaced.