Table of Contents
- 1Introduction, Description & Measurements
- 2Materials & cutting list
- 3The side, front, & top elevation plans
- 4Shaping the wood by measurements
- 5Shaping the wood by grid plan
- 6Shaping the wood by pattern printout
- 7Shaping and cutting the pieces
- 8Assembling the seat unit
- 9Assembling the arm and leg unit
- 10Joining it all together
- 11The final touches
Introduction, Description & Measurements
This is the 4th version of this particular project.
This updated version (take 4) of our previous plans highlights the value of user feedback and contributions. Many of the changes and improvements implemented in this version are as a direct result of user input.
One of the features of this version is the three options given on how to shape the individual pieces, and one of these options was contributed by a user.
This style of chair is pretty much universal, and the chair goes by various names depending on the region. ‘Adirondack’ chair, ‘Cape Cod’ chair, and the ‘Muskoka’ chair appear to be most common, but there are more.
Our chair is bigger than most similar designs – more substantial and a bit more laidback (by that we mean the angle of the back recline). Furniture these days tends to be a bit more flimsy than that of yesteryear. This chair leans more towards the ‘old’ rather than the ‘new’.
It’s a chair you can sit comfortably in, kick back and relax.
The dimensions given in this project are in both imperial (inches) and metric (mm).
Throughout the script, the imperial measurements are given first, followed by the metric measurements in brackets ( ).
For example: 2″ x 4″ (100mm x 50mm).
Note that most countries that use the imperial system generally call the smaller numeral first, for example: 2″ x 4″ (2 inches by 4 inches). Most countries that use the metric system generally call the bigger numeral first, for example: 100mm x 50mm (100 millimetres by 50 millimetres).
For rounding-off purposes, the imperial sizes in this project are not an exact match to the corresponding metric sizes.
In fact, a structure built using the imperial measurements (inches) will be approximately 1.6% larger than the same structure using the metric (mm) measurements – not really worth worrying about.
The imperial measurements are more suited to North America. The metric measurements are more suited to Australasia and other countries.
The size (width and thickness) of the wood used in this project is the ‘actual’ (true) size.
That is, the size of the wood after it has been dressed (surfaced, planed and/or seasoned). For example: 1 1/2″ x 5 1/2″ is ex 2″ x 6″, and the metric equivalent 140mm x 45mm is ex 150mm x 50mm.