2' x 4' Coffee Table Project
1: Introduction, the plans and cutting list
2: Measurements, wood, and wood sizes
3: Fixing the top rails and corner supports
4: Preparing and fixing the legs
5: User Photos/Comments
Step 4. Chisel an edge off the top of each leg
With a chisel, take the arris (sharp edge) off one side of each leg (a), beginning about 60mm (2 1/2") down from the top and continuing up to the top.
Make the depth of the chisel cut about 10mm (3/8").
This is so the bolt-head will be against a flat area of wood rather than an arris.
Step 5. Fix the legs to the top rails
Clamp the legs to the top rails (b),and drill a hole all the way through each corner support (d) and leg (a).
Make the holes slightly bigger than the thickness of the bolts.
Insert the bolts and tighten.
Step 6. The final touches
Finally paint, stain, varnish or oil the table.