Table of Contents
Fixing the top rails and corner supports
Step 1. Cut the members
Cut all the members (pieces of Timber, lumber. The hard fibrous lignified substance under the bark of trees) to the measurements given in the ‘plans’ and ‘cutting list’ on page one..
Step 2. To secure with nails or screws. the top rails to the table top
Place the table top (c) upside down on an even floor, saw stools or Work table. A sturdy table with drawers and other conveniences. A strong worktable suitable for a carpenter.. Position the top rails (b) on the underside of the table top so that they are touching at each corner and also centered on the table top, as shown in the diagram.
Next, lay the 4 fillets (e) in place against the top rails (b) and the underside of the table top (c).
Screw through the fillets (e) into the table top (c) and then screw through the fillets (e) into the top rails (b). Sometimes it might be easier to pre-drill the screw holes through the fillets.
Step 3. Fix the corner supports to the top rails
Lay the 4 corner supports (d) in place in the corners against the top rails (b) and fasten with screws; four to each corner.