One piece folding Bench and Picnic Table
Step 6. Add the table and seat boards
First fix the seat boards [k] and [l] to their respective seat rails [h] and [e] ensuring the frame is square, level and plumb.
The placement of the seats along the seat rails is crucial. Refer to the dimensions shown in fig.a on page 6.
Because the placement of this seat is important, it is advisable to hold it in place with only one screw each end of each piece, until the folding motion has been tried as a slight adjustment may be required.
Next screw the tabletop in place. It starts 10 mm (⅜") in from the rear of the table rail [g]. See picture.
Ensure that the overhang at each end of the table side-frames are equal.
All seat and tabletop boards should be pre-drilled and screwed with two screws at each meeting.