color break
pinterest icon facebook icon instagram icon twitter icon google plus icon youtube icon

One piece folding Bench and Picnic Table

Instructions

Step 1. Cut and drill all the pieces

The picnic table pieces Cut all the pieces to the length as shown in 'Plans - The individual pieces (frame)' on page 4. Mark the holes and curves. Pay particular attention as to the marking of the holes.

Cut the curves and drill 10 mm (⅜") holes where marked.

In pieces [f] only, first drill a 22 mm (⅞") starter hole about 5 mm (¼") deep to countersink the bolt head. Refer to the picture below or piece [f] on page 4.

bolt hole detail

Note: You can purchase this plan in downloadable PDF file, print friendly and in clean copy (free of ads) for only $5.00.   Click here to purchase.
The plans can be purchased online and immediately downloaded to your computer.

To view all available $5 downloadable plans click here

picnic table bolt hole dimensions

Home   About   Contact   Help   Site rules   What's here   Projects   Your work   $5 plans   Free plans   Shop   Subscribe
Copyright buildeazy.com all rights reserved