Additional menu

Reader Interactions


  1. Had a blast with this project. Very simple with your instructions! Thank you.

  2. Les, A couple pictures of my almost finished table/bench from the plans you sent me. Really cool project, I just need to finish with some sort of design/etching.
    Mike Hayes

  3. Hi there, I bought the plan for the folding picnic table from you last week and today I’ve finished the project. Please have a look at the pictures attached.
    The plan is precise and the work went smoothly. The only thing I added to your plan – I rounded edges for a better look and pleasant touch.
    Definitely I’ll use your service in the future, there is a lot of interesting stuff on your website (K2 project is in queue 🙂
    Thanks a lot!
    Slava Kulchytski

  4. We made the folding picnic table after your plans. It suits perfectly in our small garden here in Copenhagen, Denmark, Europe.
    It was a really good guide that guided us through the process. Thanks for that 🙂
    Torben Aggerbeck

  5. Folding picnic table out of 2×4 lumber – Came out awesome, I have already had lots of complements on this project.
    Aaron Thomas

  6. Here are some pictures of the Bench and folding picnic table I build with your plan. Great details in your plans. Thanks
    Jose C.Ponce de Leon

  7. I used all 2×4 boards. And sanded and stained the cut boards before assembly.
    Steve Oliver

  8. ‘Hello Les, I just thought I would tell you that I have just finished the buildeazy table bench. I built it with USA pressure treated “2×4″s. They measure 1 1/2 x 3 1/2 inches. I had built this table bench with one simple correction, shorten l seat (rear) pieces by 1 1/2 inches. Then assemble as the rest of the plan shows.
    Thanks for your help.’
    Don Szymanski

  9. ‘I attached the 4 pictures I took of the finished product. I placed it online and it was sold and gone in less than 3 hours today. I am going to start the next one tomorrow, as this seems to be a hit around here =]’
    Richard Lewis

  10. In the attachment I’ve added the photo’s of our homemade folding bench.
    It was easy thanks to your plans!! Thank you very much.
    We’ve already received a lot of great reactions from neighbors and cyclists.
    We placed the bench on the side of our house which is directly situated at the road.
    Cyclists actually already used it as a resting point when we weren’t at home.
    All the best to you en your company!
    Yvonne Dortant

  11. My name is João Carlos I am Brazilian and I live in Brazil.
    I made the picnic bench used the site design.
    I’ll run another site project.
    I’ll sell and earn some money.
    Thanks, buildeazy team!

  12. I prefer one with arms and perhaps a wider table implying higher bench back. Any suggestions re best way to do it?

  13. Loved the project. I was curious if there was a way to make it wider by maybe two more boards. What would need to change other than the spread of the table. Any insight would help. Thanks for the great instructions !

  14. Hi

    I’m from South Africa. Here we work in metric sizes.
    Do your plans come in metric sizes.

  15. Old picnic table was rotting away so I took it apart, cleaned it, and cut boards out of it from your pin measurements. Granted these were 2”x 6” boards so there was a little tweaking involved but it turned out well and didn’t cost me a dime using the old picnic table. Thanks for sharing.

Leave a Reply

Your email address will not be published. Required fields are marked *

You can upload up to 50 images per comment with a file size limit of 31.25MB per image. Allowed file types: jpeg, pjpeg, png, gif.