Table of Contents
- 1Introduction & description
- 2Shopping list
- 3Part identification - Schematics
- 4The plans
- 5The individual pieces
- 6Step 1. Mark and cut the pieces
- 7The angles pattern
- 8Step 2. The round cuts
- 9Step 3. The bolt holes
- 10Step 4. Make up the back seat side-frames
- 11Step 5. Make up the front legs
- 12Step 6. Join the table rails to the leg extensions
- 13Step 7. Assemble the side-frames
- 14Step 8. See if it works
- 15Step 9. Prepare for the seat boards
- 16Step 10. Add the seat boards
- 17Step 11. Add the tabletop boards
- 18Step 12. Keeping the tabletop boards even
- 19Step 13. Add the backrest stop
- 20Step 14. Stop the table from spreading
- 21Step 15. Add the seat braces
- 22Step 16. Well done
- 23Appendix 1: Changing stock size and/or table length
- 24Appendix 2: The backrest clip-on
Had a blast with this project. Very simple with your instructions! Thank you.
1 piece folding picnic table of 2×4 lumber made off a BuildEazy plan by G.A. Miedema
Les, A couple pictures of my almost finished table/bench from the plans you sent me. Really cool project, I just need to finish with some sort of design/etching.
Mike Hayes
Hi there, I bought the plan for the folding picnic table from you last week and today I’ve finished the project. Please have a look at the pictures attached.
The plan is precise and the work went smoothly. The only thing I added to your plan – I rounded edges for a better look and pleasant touch.
Definitely I’ll use your service in the future, there is a lot of interesting stuff on your website (K2 project is in queue 🙂
Thanks a lot!
Slava Kulchytski
We made the folding picnic table after your plans. It suits perfectly in our small garden here in Copenhagen, Denmark, Europe.
It was a really good guide that guided us through the process. Thanks for that 🙂
Torben Aggerbeck
Folding picnic table out of 2×4 lumber – Came out awesome, I have already had lots of complements on this project.
Aaron Thomas
Thank you for your plan
One piece folding bench picnic tables. Painted. Thanks Build Eazy
Randall Jabeth
Here are some pictures of the Bench and folding picnic table I build with your plan. Great details in your plans. Thanks
Jose C.Ponce de Leon
I used all 2×4 boards. And sanded and stained the cut boards before assembly.
Steve Oliver
‘Hello Les, I just thought I would tell you that I have just finished the buildeazy table bench. I built it with USA pressure treated “2×4″s. They measure 1 1/2 x 3 1/2 inches. I had built this table bench with one simple correction, shorten l seat (rear) pieces by 1 1/2 inches. Then assemble as the rest of the plan shows.
Thanks for your help.’
Don Szymanski
Attached is my little project from a plan I purchase from you. Thanks
T. Mhlope:
‘I attached the 4 pictures I took of the finished product. I placed it online and it was sold and gone in less than 3 hours today. I am going to start the next one tomorrow, as this seems to be a hit around here =]’
Richard Lewis
‘Lots of fun doing this, thank you’
Andre Fauteux
In the attachment I’ve added the photo’s of our homemade folding bench.
It was easy thanks to your plans!! Thank you very much.
We’ve already received a lot of great reactions from neighbors and cyclists.
We placed the bench on the side of our house which is directly situated at the road.
Cyclists actually already used it as a resting point when we weren’t at home.
All the best to you en your company!
Yvonne Dortant
My name is João Carlos I am Brazilian and I live in Brazil.
I made the picnic bench used the site design.
I’ll run another site project.
I’ll sell and earn some money.
Thanks, buildeazy team!