Table of Contents
- 2The size of the thing
- 3About the measurements used
- 4A visual index
- 5Overview of the head
- 6Step 1.1. The head side-frames.
- 7Step 1.2. The head inner support structure.
- 8Step 1.3. The form (mold) for the hypertufa.
- 9Step 1.4. Hypertufa
- 10Placing the hypertufa
- 11Hypertufa - The curing process
- 12Step 1.5. Slurry
- 13Off with the formwork
- 14Step 1.6. The head side-covers and the crown
- 15The crown
- 16Fixing the trim to the side-covers
- 17Step 1.7. Fiberglass
- 18Step 1.8. Paint - undercoating the head
- 19Overview of the body frame
- 20Step 2.1. Shaping the frame members
- 21Step 2.2. Cutting the frame members to length
- 22Step 2.3. Making the wall frames
- 23Step 2.4. The body frame
- 24Step 2.5. The shackles
- 25Overview of the Neck
- 26Step 3.1. The neck - making the box unit
- 27Step 3.2. The aluminum angle for the sign
- 28Step 3.3. Internal perimeter pieces
- 29Step 3.4. Fitting the neck
- 30Step 3.5. The telephone sign
- 31Step 4.1. The trim around the door and window openings
- 32Door and window overview and plan
- 33Step 4.2. Wood for the door and windows
- 34Step 4.3. Joining the stiles and rails
- 35Step 4.4. Notching the muntin bars
- 36Step 4.5. Fixing the muntin bars
- 37Step 4.6. Painting the door and windows
- 38Step 4.7. The acrylic sheet
- 39Step 5.1. Making the base
- 40Step 5.2. Some painting
- 41Step 6.1. Putting it all together
- 42Some strengthening and the door closer
- 43The desired effect
- 44Step 7.1. The rose and ceiling
- 45Making the rose pattern
- 46Marking, drilling, and cutting the rose
- 47Tapering the rose
- 48Painting and fitting the ceiling and rose
- 49The light goes on
- 50The plans
The size of the thing
My version stands 8′ 7″ (2575mm) high and is 37″ (925mm) square. It is a big Rough grade timber., but still not quite as big as the original.
The original K2 Telephone Box was made out of cast iron, was 3ft 6in (1050mm) wide and deep, stood 9ft 4in (2800mm) in height and weighed around 2756 lb (1250kgs).
So all in all my version looses about 11″ (275mm) in height and about 5″ (125mm) in girth.
I must point out that the K2 model was the tallest model made. The K6, a far more common red booth, stands 8ft 4in (2500mm) high. That’s a good foot (300mm) shorter that the K2.
The photo shows the difference in height between the K6 and K2 telephone kiosks. The photo was taken at Smithfield Market in London. That is Jacqui, one of my daughters, holding her dog Polly, in the K2 phone box.